Mini Core 360 Adaptor for 74g Cartridge/Bulb (G1/2 Male x 5/8-18UNF Female).

This adaptor for the Core 360 Mini Regulator will allow you to use the oversized disposable 74gram co2 bulbs so you can take your keg system anywhere.

This 8L keg is light weight, compact and has high oxygen barrier properties with 3x better(less) gas transmission than traditional PET grades of plastic making it suitable for beer storage or other oxygen sensitive carbonated and non-carbonated beverages.

This product is sold with the PCO38 cap however if you would like to dispense this product through a draft system we recommend the use of the PCO38 Tapping Head (KL20169).  The tapping head is sold separately and allows you to attach standard ball lock disconnects and pressure reliefvalve to the top of this keg design.

What is Oxebar Mono
Oxebar Mono is a PET polymer blend that utilises several polymers blended together to significantly improve gas barrier properties. When compared with standard PET plastic Oxebar Mono is able to reduce oxygen ingress and CO2 loss so your precious beverage is preserved and shelf life extended by x3. We recommend this product for beer stored in keg up to 6 months.

Dimensions
Diameter:155mm
Height: 520mm

3 x PCO1881 Male Threads to PCO38 Female Thread

The PCO38 keg system is an inexpensive keg system that utilises quality engineering plastics and efficient injection stretch blow mold processes to manufacture economical kegs and tapping heads for both home brewing and commercial beers.

This particular tapping head kit is designed to be used in conjunction with a 35psi/2.5bar pressure release valve.
1 x KB10537 - Red PRV 1881 Cap Combo (35psi/2.5bar)
Do not exceed recommended pressure of 35psi.

The PCO Kegs come in a range of sizes:
8L PET Keg
4L PET Keg - coming soon

This PCO38 tapping head assembly has been designed to suit standard PCO38 bottle necks such as the 8L PET keg.

The PCO38 keg system is a inexpensive keg system that utilises quality engineering plastics and efficient injection stretch blow mould processes to manufacture economical kegs and tapping heads for both home brewing and commercial beers.

This particular tapping head kit comes included with 2.5bar pressure relief valve, liquid and gas ball lock posts and dip tube.

The plastics used in the tapping head can withstand a wide range of chemicals used in the brewing industry and relatively high temperatures (over 100C).

NOTE: The 8L keg shown in the photos is not included.