Fed up of washing bottles? This starter kit will let you keg your beer instead! 

To use this to carbonate and serve your own beer, you will also need a CO2 gas bottle (various sizes available) OR a sodastream adaptor so you can use sodastream bottles.

You will need to provide your own beer and a fridge to keep the keg cold!

These 58L stainless steel vessels are designed just like a commercial beer keg but with a large 10cm (4inch) tri-clover opening at the top so you can easily get inside the keg to clean it out. This new 58L size is perfect for doing 50L batches so you have a bit of spare head space inside the Kegmenter.

This Kegmenter is bundled with a stainless 4inch tri-clamp ball lock lid which will enable you to turn your kegmenter into a unitank fermenter, and pressurisable so it can also be used as a keg.

These 29L stainless steel vessels are designed just like a commercial beer keg but with a large 10cm (4inch) tri-clover opening at the top so you can easily get inside the keg to clean it out. This new 29L size is perfect for doing 20-25L batches so you have a bit of spare head space inside the Kegmenter.

This Kegmenter is bundled with a stainless 4inch tri-clamp ball lock lid which will enable you to turn your kegmenter into a unitank fermenter, and pressurisable so it can also be used as a keg.

These are high quality and made from thicker neoprene.  You will find that our parkas are signficantly thicker than our competitors making the jackets simply insulate better for longer.

Fed up of washing bottles? This starter kit will let you keg your beer instead! 

To use this to carbonate and serve your own beer, you will also need a CO2 gas bottle (various sizes available) OR a sodastream adaptor so you can use sodastream bottles.

You will need to provide your own beer and a fridge to keep the keg cold!

New commercial 20 litre stainless kegs with D-Type spear included and rubber base and handle.

An insulated, neoprene jacket for mini kegs with glow-in-the-dark Kegland branding. Great for BBQs, camping, or parties.

Features:

1. 8mm thick neoprene. Most other keg jackets are only 4mm meaning they simply do not insulate as well.
2. 16gram CO2 bulb pockets.
3. Velcro around the top so you can attach various accessories.
4. Comes with heavy duty webbing shoulder strap.

Mini Core 360 Adaptor for 74g Cartridge/Bulb (G1/2 Male x 5/8-18UNF Female).

This adaptor for the Core 360 Mini Regulator will allow you to use the oversized disposable 74gram co2 bulbs so you can take your keg system anywhere.

This 8L keg is light weight, compact and has high oxygen barrier properties with 3x better(less) gas transmission than traditional PET grades of plastic making it suitable for beer storage or other oxygen sensitive carbonated and non-carbonated beverages.

This product is sold with the PCO38 cap however if you would like to dispense this product through a draft system we recommend the use of the PCO38 Tapping Head (KL20169).  The tapping head is sold separately and allows you to attach standard ball lock disconnects and pressure reliefvalve to the top of this keg design.

What is Oxebar Mono
Oxebar Mono is a PET polymer blend that utilises several polymers blended together to significantly improve gas barrier properties. When compared with standard PET plastic Oxebar Mono is able to reduce oxygen ingress and CO2 loss so your precious beverage is preserved and shelf life extended by x3. We recommend this product for beer stored in keg up to 6 months.

Dimensions
Diameter:155mm
Height: 520mm

3 x PCO1881 Male Threads to PCO38 Female Thread

The PCO38 keg system is an inexpensive keg system that utilises quality engineering plastics and efficient injection stretch blow mold processes to manufacture economical kegs and tapping heads for both home brewing and commercial beers.

This particular tapping head kit is designed to be used in conjunction with a 35psi/2.5bar pressure release valve.
1 x KB10537 - Red PRV 1881 Cap Combo (35psi/2.5bar)
Do not exceed recommended pressure of 35psi.

The PCO Kegs come in a range of sizes:
8L PET Keg
4L PET Keg - coming soon

This PCO38 tapping head assembly has been designed to suit standard PCO38 bottle necks such as the 8L PET keg.

The PCO38 keg system is a inexpensive keg system that utilises quality engineering plastics and efficient injection stretch blow mould processes to manufacture economical kegs and tapping heads for both home brewing and commercial beers.

This particular tapping head kit comes included with 2.5bar pressure relief valve, liquid and gas ball lock posts and dip tube.

The plastics used in the tapping head can withstand a wide range of chemicals used in the brewing industry and relatively high temperatures (over 100C).

NOTE: The 8L keg shown in the photos is not included.

This silicone elbow is a replacement for the elbow provided in the PCO38 Tapping Head Kit.

Allowing for a 90 degree connection between the barb on the yellow liquid plastic carbonation cap and the 6.3mm OD dip tube provided in the kit.

Replacement lid for PCO38 PET kegs.

Please note: All PCO38 kegs do not have a washer/seal/o-ring. It uses a wedge compression sealing much like a Coca-Cola Bottle does.

No bottling or wasting that little bit left over from standard sized 23L batches and a 19L keg and perfect for smaller experimental batches.

• Portable size
• Pressure carbonate (using the ball lock cap)
• Stainless steel body
• Handles for easy transportation

No bottling or wasting that little bit left over from standard sized 23L batches and a 19L keg and perfect for smaller experimental batches.

Features:
- Core Puncturing / Actuator - Zero gas lost to screwing in bulbs or Sodastream style cylinders.
- Interchangeable ball lock disconnect orientations (e.g. 45° Premium Ball lock to 90° Stainless Disconnects)
- 6.5mm duotight compatible hose barb, can also suit hose and stepless clamps (e.g. 4mm ID, 5mm ID or 6mm ID hose)
- Heavily Protected Mini Guage Dial. (Also interchangeable to different ranges)
- Common Pressure relief valve compatible. (65psi Green PRV as standard, compatible with 35psi Red and 100psi Grey)

Please note this is not compatible with the 2.6kg or 5.0kg CO2 Cylinders.

Glow in the Dark Mini Keg parka. 

Features:

1. 8mm thick neoprene. Most other keg parkas are only 4mm meaning they simply do not insulate as well

2. 16gram CO2 bulb pockets

3. Has velcro around the top so you can attach various accessories such as the neoprene lid (sold separately)

4. Comes with heavy duty webbing sholder strap

Mini Keg with 10 litre capacity are specifically designed for home brewing/growler dispensing. They are suited to small batches and to people who want to fit them into their standard domestic fridges.

This mini keg system is great as a portable keg to take to parties, BBQs, or just having a few beers in the sun.

You can naturally carbonate using priming sugars or preferably force carbonate and serve your beer with the ball lock lid/tapping head.

This mini drafto tapping head will turn your growler into a portable keg system.

(Growler is purchased separately) 

This convenient growler tapping head is the best way to keep your precious beer fresh and carbonated in the beer. The pressure applied by CO2 will keep your beer away from damaging oxygen and keep the beer carbonated for ages. The vacuum walled growler will also keep the beer cold for ages meaning you don't even need a chilly bin or cooler box.

Please note: This system doesn't include the regulator, growler or 16gram bulbs. These can be purchase separately.