Duotight 8mm x Ball Lock Disconnect (Black + Yellow/Liquid)

This all new ball lock disconnect sets a new bar! The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably - no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitising an absolute breeze!

Made from highly chemical resistant materials with stainless springs and ball bearings - no cheap ABS plastics here - this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitisers and caustics.

This rigid 50mm long joiner is made from strong polypropylene. It's useful to make rigid joins with push in fittings that are dead straight. 

Dimensions: 8mm OD x 6mm ID x 50mm long

This elbow piece is suitable for our EVABarrier Beer & Gas hosing in 9.5mm (3/8") OD line to 6.5mm (1/4") OD to male 1/2" BSP Thread.  

No clamps necessary!

John Guest 5/16 x 1/4 FFL

Perfect for attaching a MFL fitting or connector to a 8mm "5/16" hose.

Quality fitting by John Guest.

An MFL Check Valve to prevent backflow, with 1/4″ FFL outlet x 1/4″ MFL Inlet.

Use this check valve on ball lock gas connectors with MFL thread. Its internal mechanism prevents accidental back-flow of beer into the gas line on your kegging set up.

Are you ever in a situation where you don't want to unhook your gas line from your kegs, or have ball lock disconnects that you need to clean over at the sink but don't want to take your gas line all the way over there? Well, Kegland thought of a better way. Why not fill a PET Bottle with your cleaner / sanitiser and pump it without gas!

This little device can also be used as a mini party keg without a gas source (should be consumed well within 24 hours of pumping). BYO Liquid disconnect, hose and picnic tap.

Contains:
1 x KegLand Yellow Carbonation Cap
1 x KegLand PCO Tee Piece (Female x Male x Male)
1 x Mini Yellow Hand Pump
1 x 30cm Piece of EVABarrier Line 5mm ID x 8mm OD (can be stretched for larger PET bottles)

Pressure Relief Valve (PRV) fitting for connecting onto a gas post so that you can release pressure while controlling the fill speed when transferring beer from one vessel to another.

No clamps necessary, however we do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collect and the hose can be removed.

These push in fittings are suitable to be used up to 100 psi.

No clamps Necessary!

The MFL Tap Shank Adaptor is what you need to connect your draft tap directly to your MFL disconnect. These allow you to make a very compact portable setup.

We recommend using one of the Flow Control Nukatap with this adaptor as this provides some restriction of the flow but they will also work with Intertap, Nukatap and other brands of taps. A nylon washer is also recommended between the disconnect and the shank adaptor.

Please bear in mind that due to the compact size there is not enough space to accommodate an auto spring return so it is not compatible that setup.

John Guest 1/4" to 5/16" straight connector