Duotight 6.35mm x Ball Lock Disconnect (Grey + Red/Gas)

This all new ball lock disconnect sets a new bar! The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably - no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitising an absolute breeze!

Made from highly chemical resistant materials with stainless springs and ball bearings - no cheap ABS plastics here - this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitisers and caustics.

Duotight 9.5mm mm x Ball Lock Disconnect (Grey + Red/Gas)

This all new ball lock disconnect sets a new bar! The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably - no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitising an absolute breeze!

Made from highly chemical resistant materials with stainless springs and ball bearings - no cheap ABS plastics here - this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitisers and caustics.

Duotight 6.35mm x Ball Lock Disconnect (Black + Yellow/Liquid)

This all new ball lock disconnect sets a new bar! The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably - no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitising an absolute breeze!

Made from highly chemical resistant materials with stainless springs and ball bearings - no cheap ABS plastics here - this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitisers and caustics.

Duotight 9.5mm x Ball Lock Disconnect (Black + Yellow/Liquid)

This all new ball lock disconnect sets a new bar! The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably - no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitising an absolute breeze!

Made from highly chemical resistant materials with stainless springs and ball bearings - no cheap ABS plastics here - this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitisers and caustics.

This beer line tidy is a handle little part that will help you organise your beer and gas line inside your fridge, keezer, kegerator or cellar. This keeps your beer and gas plumbing neat and tidy so your draft system looks as good as it works. Designed to suit both 8mm outer diameter hosing like 4mm x 8mm EVABarrier and 5mm x 8mm EVABarrier hosing. It can also fit smaller 3mm x 6.35mm EVABarrier hosing but may slip out more easily than the standard 8mm outer diameter hosing.

Simply remove the was paper and use the strong 3M adhesive to attach this beer/gas line organiser to whatever device you like.

This Elbow Piece is suitable for EVABarrier Beer & Gas hosing in 4mm ID & 5mm ID line or most lines with 8mm outer diameter. 

No clamps necessary!

These high quality acetal fittings are made with EPDM o-rings that are reliable, will not perish like cheaper rubber. The acetal plastic is also chemical and UV resistant so it will last for a long time even in testing conditions.

This product is ideally suited to the 9.5mm (3/8") EVABarrier tubing.

This easy to use and compact spunding valve is handy for keg transfers or pressurized fermentations when you want to limit oxygen exposure and use counter pressure in the keg you are filling into or in the fermenter you are using.

Digital Illuminated Mini Gauge 0-90psi (0-6.2bar) - Duotight 8mm Stem.

Kegland has developed the worlds most compact mini digital gauge with backlight illumination. This very compact design retains high accuracy while still meeting the desirable small form factor.  This meets the growing need as mini keg systems, mini regulators and other more compact keg dispensing solutions is required.

Easily connect your beer or gas line to your MFL fitting. 
Note: MFL keg connector and tubing sold separately.

Brand: Duotight

Duotight - 8mm shut off ball valve. This is an equal ball valve to take 8mm OD tubing in both sides.

No clamps necessary!

From: Kegland

Duotight 8mm (5/16) one way check valve/non-return valve.


From: Kegland

This low profile elbow bend sits just 17mm above the top of the keg coupler. This makes it perfect for tight spaces or inside a Kegerator. 

Note: You will need a washer/seal if you don't not have one (not included). 

A Barbed Swivel Nut, often used for MFL fittings.

Bore size 4.76mm (3/16")

A Barbed Swivel Nut, often used for MFL fittings.

Bore size 6.35mm (1/4")

This Push-Fit Joiner will allow you to join beer or gas line sections on your kegging system.

Note that this is 10mm diameter in and out.

They are extremely easy to use and allow you to simply push your beer and gas line straight into these fittings. No need to purchase clamps or tools.

To remove the fitting, simply push in the collet and the hose can be removed.

Fits 10mm outer diameter tube.

Note: colour may vary.

A barbed stainless steel T (tee) piece for splitting a keg line.

Bore size:
6.35mm (1/4")