Connectors
-
$4.90 -
$8.00Stainless Steel Barbed Tee 6mm
A stainless steel "tee" with 3 6mm barb connections. Most commonly used for branching your gas line to supply equal pressure to additional kegs.
As with any barb-to-gas-line connection, we recommend using Oetiker clamps to ensure a leak-free system. -
$8.00John Guest 1/4" x 1/4 bsp
An adaptor with 1/4bsp thread to a 1/4" tube push-fitting. Suitable for connecting 1/4" tube direct to a regulator outlet.Out of Stock -
$11.50John Guest Straight Connector 1/2" - 5/16"
Commercial grade Straight Connector, ideal for joining a 5/16" tube to a 1/2" tube. -
$4.95Duotight - 6.35mm (¼") Female x 9.5mm (3/8”) Female Reducer
This reducer is suitable for EVABarrier Beer & Gas hosing in 9.5mm (3/8") OD line to 6.5mm (1/4") OD.
No clamps necessary!
From: Kegland
Out of Stock -
$4.95Duotight 9.5mm (3/8) Female x FFL Thread
This straight joiner is suitable for our EVABarrier Beer & Gas hosing in 6mm ID x 9.5mm OD line or most lines with 9.5mm outer diameter.
-
$4.95Duotight - 9.5mm (3/8) Female x 3/4" Female Thread
This straight joiner is suitable for EVABarrier Beer & Gas hosing in 6mm x 9.5mm line.
-
$4.95Duotight - 6.35mm (¼") Female x ¾" BSPT Female Thread
This reducer is suitable for EVABarrier Beer & Gas hosing in 9.5mm (3/8") OD line to 6.5mm (1/4") OD.
From: Kegland
-
$6.00Duotight - 9.5mm (3/8”) Female x 9.5mm (3/8”) Female One Way Check Valve (Gas)
This tee piece is suitable for EVABarrier Beer & Gas hosing size - 9.5mm (3/8") OD x 6.5mm (1/4") ID. Due to the fact that this check valve cannot be taken apart to clean, we do not recommend it to be used with liquid.
No clamps necessary!
-
$4.95Duotight - 9.5mm (3/8) Female x 9.5mm (3/8) Female Ball Valve
This elbow piece is suitable for EVABarrier Beer & Gas hosing in 9.5mm (3/8") OD line to 6.5mm (1/4") OD to male 1/2" BSP Thread.
No clamps necessary!
-
$4.95Duotight - 9.5mm (3/8) Female x 9.5mm (3/8) Female Elbow
This elbow piece is suitable for EVABarrier Beer & Gas hosing size - 9.5mm (3/8") OD x 6.5mm (1/4") ID
No clamps necessary!
-
$4.95Duotight - 9.5mm (3/8) Female x 9.5mm (3/8) Female Tee Piece
This tee piece is suitable for EVABarrier Beer & Gas hosing size - 9.5mm (3/8") OD x 6.5mm (1/4") ID
No clamps necessary!
-
$4.95Duotight - 9.5mm (3/8) Female x 9.5mm (3/8) Female Joiner
This push in joiner is suitable for our EVABarrier Beer & Gas hosing in 9.5mm (3/8") OD line.
No clamps necessary!
-
$4.95Duotight - 9.5mm (3/8) Female x 1/2 Male Thread
This piece is suitable for EVABarrier Beer & Gas hosing in 9.5mm (3/8") OD line to 6.5mm (1/4") OD to male 1/2" BSP Thread. Perfect for attaching to this copper counter flow chiller.
Out of Stock -
$4.95Duotight - 9.5mm (3/8) Female x 5/8 Female Thread (suits Keg Couplers and Tap Shanks)
This straight joiner is suitable for our EVABarrier Beer & Gas hosing in 6mm x 9.5mm line. This allows a direct duotight push fitting to attach directly to a keg coupler.
No clamps necessary!
-
$4.95Duotight 8mm (5/16) Female x 1/4 Inch BSP Male Thread (With Seated O-Ring)
This handy small duotight to male 1/4 BSP threaded piece. Particularly useful for many standard gas fittings. The 1/4 inch thread fits into the regulator body, manifolds and many other fittings that often use 1/4inch thread.
Brand: Duotight
Material: Plastic
-
$9.95Mini Gauge 0-15psi (0-1.5bar) - For Inline Duotight Regulator Or Blowtie
Mini Gauge 0-15psi (0-1.5bar) - for inline Duotight regulator or Blowtie.
This gauge is designed to fit into either our inline regulator or our Blowtie unit. These can be used for water or gas.
-
$4.95Duotight - 9.5mm (3/8) x 1/4" Male Thread
This straight joiner is suitable for EVABarrier Beer & Gas hosing in 6mm x 9.5mm line.
No clamps necessary!
-
$4.95Duotight - 8mm (5/16”) Female x 3/8" Male Thread (with O ring)
This piece is suitable for EVABarrier Beer & Gas hosing in 4mm ID & 5mm ID line or most lines with 8mm outer diameter.
No clamps necessary!
-
$4.95Duotight - 9.5mm (3/8”) Female x 9.5mm (3/8”) Male Elbow
This elbow piece is suitable for EVABarrier Beer & Gas hosing size - 9.5mm (3/8") OD x 6.5mm (1/4") ID
No clamps necessary!
-
$4.95Duotight - Seal Kit for Flow Control Keg Connector
Seal Kit - duotight 8mm x Flow Control Ball Lock Disconnect
Please refer to the product photos for an exploded diagram of where the replacement seals and poppet placement. -
$64.95Beer Manifold - Three Way
Serve your beer to multiple places from a single source with this clever liquid manifold.
Connect the keg to the manifold barb end and dispense to three locations.
- 3-way, one barb end manifold – lets you serve at three locations
- Made of 304 grade stainless steel
- Wall mount bracket included
-
$16.95Keg Connector - Duotight Flow Control - 8mm Liquid
Duotight 8mm x Flow Control Ball Lock Disconnect (Black-Yellow/Liquid).
This all new ball lock disconnect sets a new bar! The integrated duotight design means you can connect your beer line directly, easily and reliably - no need for additional fittings or clamps. It is a robust and super compact compared to the previous Stainless Steel Flow Control Ball Lock that has been discontinued due to the difficulty in repeated tooling and overall cost of raw materials.
-
$4.95Duotight - 6.35mm (1/4) Screwlock x 8mm (5/16) - Reducer Elbow
These high quality acetal fittings are made with EPDM o-rings that are reliable, will not perish like cheaper rubber. The acetal plastic is also chemical and UV resistant so it will last for a long time even in testing conditions.
-
$4.95Duotight - 8mm (5/16") Female x 8mm (5/16") Female Bulkhead with 20mm Locknut
These high quality acetal fittings are made with EPDM o-rings that are reliable, will not perish like cheaper rubber. The acetal plastic is also chemical and UV resistant so it will last for a long time even in testing conditions.
This product is ideally suited to the 8mm (3/8") EVABarrier tubing.
