Connectors
-
5/16" John Guest plug
A 5/16" John Guest plug, to block a 5/16" connection when it is not in use.Out of Stock -
John Guest 5/16"x 1/4" tube to hose adaptor
A 5/16" x 1/4" John Guest tube to hose adaptor to connect a 1/4" hose to a 5/16" push-fit connection.Out of Stock -
5/16" x 3/8" John Guest straight connector
A 5/16" x 3/8" John Guest straight connector to connect a 3/8" tube to a 5/16" tube.Out of Stock -
5/16" / 8mm John Guest Equal Straight Connector
Commercial grade Equal Straight Connector, ideal for joining two 5/16" tubes together. -
1/2" x 1/2" John Guest tube to hose adaptor
A 1/2" x 1/2" John Guest tube to hose adaptor to connect a 1/2" hose to a 1/2" push-fit connection. -
Stainless Steel Barbed Tee 6mm
A stainless steel "tee" with 3 6mm barb connections. Most commonly used for branching your gas line to supply equal pressure to additional kegs.
As with any barb-to-gas-line connection, we recommend using Oetiker clamps to ensure a leak-free system. -
John Guest 1/4" x 1/4 bsp
An adaptor with 1/4bsp thread to a 1/4" tube push-fitting. Suitable for connecting 1/4" tube direct to a regulator outlet.Out of Stock -
John Guest Straight Connector 1/2" - 5/16"
Commercial grade Straight Connector, ideal for joining a 5/16" tube to a 1/2" tube. -
Duotight - 6.35mm (¼") Female x 9.5mm (3/8”) Female Reducer
This reducer is suitable for EVABarrier Beer & Gas hosing in 9.5mm (3/8") OD line to 6.5mm (1/4") OD.
No clamps necessary!
From: Kegland
Out of Stock -
Duotight 9.5mm (3/8) Female x FFL Thread
This straight joiner is suitable for our EVABarrier Beer & Gas hosing in 6mm ID x 9.5mm OD line or most lines with 9.5mm outer diameter.
-
Duotight - 9.5mm (3/8) Female x 3/4" Female Thread
This straight joiner is suitable for EVABarrier Beer & Gas hosing in 6mm x 9.5mm line.
-
Duotight - 6.35mm (¼") Female x ¾" BSPT Female Thread
This reducer is suitable for EVABarrier Beer & Gas hosing in 9.5mm (3/8") OD line to 6.5mm (1/4") OD.
From: Kegland
-
Duotight - 9.5mm (3/8”) Female x 9.5mm (3/8”) Female One Way Check Valve (Gas)
This tee piece is suitable for EVABarrier Beer & Gas hosing size - 9.5mm (3/8") OD x 6.5mm (1/4") ID. Due to the fact that this check valve cannot be taken apart to clean, we do not recommend it to be used with liquid.
No clamps necessary!
-
Duotight - 9.5mm (3/8) Female x 9.5mm (3/8) Female Ball Valve
This elbow piece is suitable for EVABarrier Beer & Gas hosing in 9.5mm (3/8") OD line to 6.5mm (1/4") OD to male 1/2" BSP Thread.
No clamps necessary!
-
Duotight - 9.5mm (3/8) Female x 9.5mm (3/8) Female Elbow
This elbow piece is suitable for EVABarrier Beer & Gas hosing size - 9.5mm (3/8") OD x 6.5mm (1/4") ID
No clamps necessary!
-
Duotight - 9.5mm (3/8) Female x 9.5mm (3/8) Female Tee Piece
This tee piece is suitable for EVABarrier Beer & Gas hosing size - 9.5mm (3/8") OD x 6.5mm (1/4") ID
No clamps necessary!
-
Duotight - 9.5mm (3/8) Female x 9.5mm (3/8) Female Joiner
This push in joiner is suitable for our EVABarrier Beer & Gas hosing in 9.5mm (3/8") OD line.
No clamps necessary!
-
Duotight - 9.5mm (3/8) Female x 1/2 Male Thread
This piece is suitable for EVABarrier Beer & Gas hosing in 9.5mm (3/8") OD line to 6.5mm (1/4") OD to male 1/2" BSP Thread. Perfect for attaching to this copper counter flow chiller.
Out of Stock -
Duotight - 9.5mm (3/8) Female x 5/8 Female Thread (suits Keg Couplers and Tap Shanks)
This straight joiner is suitable for our EVABarrier Beer & Gas hosing in 6mm x 9.5mm line. This allows a direct duotight push fitting to attach directly to a keg coupler.
No clamps necessary!