Connectors
-
Duotight 9.5mm (3/8) Female x FFL Thread
This straight joiner is suitable for our EVABarrier Beer & Gas hosing in 6mm ID x 9.5mm OD line or most lines with 9.5mm outer diameter.
-
Duotight - 9.5mm (3/8) Female x 3/4" Female Thread
This straight joiner is suitable for EVABarrier Beer & Gas hosing in 6mm x 9.5mm line.
-
Duotight - 6.35mm (¼") Female x ¾" BSPT Female Thread
This reducer is suitable for EVABarrier Beer & Gas hosing in 9.5mm (3/8") OD line to 6.5mm (1/4") OD.
From: Kegland
-
Duotight - 9.5mm (3/8”) Female x 9.5mm (3/8”) Female One Way Check Valve (Gas)
This tee piece is suitable for EVABarrier Beer & Gas hosing size - 9.5mm (3/8") OD x 6.5mm (1/4") ID. Due to the fact that this check valve cannot be taken apart to clean, we do not recommend it to be used with liquid.
No clamps necessary!
-
Duotight - 9.5mm (3/8) Female x 9.5mm (3/8) Female Ball Valve
This elbow piece is suitable for EVABarrier Beer & Gas hosing in 9.5mm (3/8") OD line to 6.5mm (1/4") OD to male 1/2" BSP Thread.
No clamps necessary!
-
Duotight - 9.5mm (3/8) Female x 9.5mm (3/8) Female Elbow
This elbow piece is suitable for EVABarrier Beer & Gas hosing size - 9.5mm (3/8") OD x 6.5mm (1/4") ID
No clamps necessary!
-
Duotight - 9.5mm (3/8) Female x 9.5mm (3/8) Female Tee Piece
This tee piece is suitable for EVABarrier Beer & Gas hosing size - 9.5mm (3/8") OD x 6.5mm (1/4") ID
No clamps necessary!
-
Duotight - 9.5mm (3/8) Female x 9.5mm (3/8) Female Joiner
This push in joiner is suitable for our EVABarrier Beer & Gas hosing in 9.5mm (3/8") OD line.
No clamps necessary!
-
Duotight - 9.5mm (3/8) Female x 1/2 Male Thread
This piece is suitable for EVABarrier Beer & Gas hosing in 9.5mm (3/8") OD line to 6.5mm (1/4") OD to male 1/2" BSP Thread. Perfect for attaching to this copper counter flow chiller.
Out of Stock -
Duotight - 9.5mm (3/8) Female x 5/8 Female Thread (suits Keg Couplers and Tap Shanks)
This straight joiner is suitable for our EVABarrier Beer & Gas hosing in 6mm x 9.5mm line. This allows a direct duotight push fitting to attach directly to a keg coupler.
No clamps necessary!
-
Duotight 8mm (5/16) Female x 1/4 Inch BSP Male Thread (With Seated O-Ring)
This handy small duotight to male 1/4 BSP threaded piece. Particularly useful for many standard gas fittings. The 1/4 inch thread fits into the regulator body, manifolds and many other fittings that often use 1/4inch thread.
Brand: Duotight
Material: Plastic
-
Mini Gauge 0-15psi (0-1.5bar) - For Inline Duotight Regulator Or Blowtie
Mini Gauge 0-15psi (0-1.5bar) - for inline Duotight regulator or Blowtie.
This gauge is designed to fit into either our inline regulator or our Blowtie unit. These can be used for water or gas.
-
Duotight - 9.5mm (3/8) x 1/4" Male Thread
This straight joiner is suitable for EVABarrier Beer & Gas hosing in 6mm x 9.5mm line.
No clamps necessary!
-
Duotight - 8mm (5/16”) Female x 3/8" Male Thread (with O ring)
This piece is suitable for EVABarrier Beer & Gas hosing in 4mm ID & 5mm ID line or most lines with 8mm outer diameter.
No clamps necessary!
-
Duotight - 9.5mm (3/8”) Female x 9.5mm (3/8”) Male Elbow
This elbow piece is suitable for EVABarrier Beer & Gas hosing size - 9.5mm (3/8") OD x 6.5mm (1/4") ID
No clamps necessary!