This stainless 4inch tri-clover ball lock lid will enable you to turn your kegmenter into a uni tank, pressurisable fermenter or so it can be used as a keg.

This lid comes with a red pressure relief valve (that opens at 2.5bar - compatible thread to Cornelius type PRVs).  The lid has accurately machined gas and liquid posts. 

This lid is ideally suited to also fermenting under pressure so you can use a spunding valve/adjustable pressure relief valve so you can naturally carbonate during primary fermentation.

This is the easy way to have continuous soda water on tap. Don't waste your time with Sodastream or other more expensive carbonators. This simple device makes it easy to have continuous carbonated soda water fed from your mains water supply.

Replacement pressure relief valve (PRV) for corny kegs, MK4 Regulators, and FermZilla Lids.

Now available in three pressure ratings:

Yellow - 17 PSI
Red - 35 PSI
Green - 65 PSI
Grey - 100 PSI

These seals replace the red o-ring seal inside the 20L Oxebar kegs.

Includes:
5 x Low2 Keg Lid Seals to suit the 20L Oxebar Keg (Yellow)

Colour coded Yellow and Red Ball Lock Keg Post O-Rings. Silicone for superb malleability and spring back memory performance.

A plastic gas ball-lock disconnect with a 6mm barbed fitting for your gas line. CMB quality. Stainless steel and MFL versions are available.

For gas line we recommend using 6mm Ledavin, commercial grade gas line with a 6mm internal diameter, which is easy to fit over the standard 6mm barb.