Stainless Steel Immersion Wort Chiller – 7.5m length

Immersion chillers are the easiest to use and clean chillers for all grain brewers. Just drop it into your hot wort and turn on the water. Occasional stirring or recirculating with a pump will reduce cooling times considerably.

Outer diameter of the stainless steel tube is 10mm. The total diameter of the coil is approximately 250mm.

Copper Immersion Wort Chiller – 7.5m length

Immersion chillers are the easiest to use and clean chillers for all grain brewers. Just drop it into your hot wort and turn on the water. Occasional stirring or recirculating with a pump will reduce cooling times considerably.

Outer diameter of the copper tube is 10mm. The total diameter of the coil is approximately 250mm.

The Chillout MKIII is the fastest way to chill your wort to yeast pitching temperature to get your fermentation off to a quick healthy start.

The Chillout is made from stainless steel and brazed together with pure copper. It also has ripples up and down each plate. This creates more surface area and improves heat transfer.

These copper counter flow chillers are probably one of the fastest ways to chill wort. They are similarly efficient as the 30 plate chillers however they are easier to clean as they do not have all the small crevasses to trap hop material and other solids.

The copper is a very good conductor of heat. These units are 23cm in diameter and about 18cm high. The input and output are approximately 10mm outside diameter. These can be used with gravity but are recommended to use with a pump.

Upgrade your RoboBrew Chiller with a Counterflow chiller to rapidly chill your wort without the messy clean up!

Coolossus Gen2 - Passivated Stainless Steel Counter Flow Chiller with 1.5" Tri Clover Wort Lines - 1/2" Water Line ( 9.5m Long)

Chill your wort down like a pro with professional 1.5" Tri Clover fittings! Unlike plate chillers that utilise copper's great conductivity, this 6.5m fully 304 passivated stainless steel chiller can withstand high hop additions without clogging.

The Coolossus also has high chemical resistance unlike plate chillers and other copper immersion chillers. 

NEW Gen 2.1 Upgrade: 3mm Steel plate with three 4mm mounting holes.

The Glycol Chiller Adapter (GCA) is designed to expand on the capabilities of the Grainfather Glycol Chiller, by allowing almost any fermenter on the market to be connected, and temperature controlled - including most plastic bucket fermenters!

This product is not kept in stock in our shop but we can order them in for our customers. If you wish to find out more about this product, please contact us.

IceMaster G20 - Glycol Chiller - Digital Fermentation Control - (with 2 integrated pumps for dual temp).

The Icemaster G20 is an efficient glycol chiller that has fantastic cooling performance. It's compact, quiet and ideal for a domestic environment. It is powerful enough to chill well-insulated fermenters up to 300L in size or multiple smaller fermenters. It has about 600-watt cooling power making it suitable for crash chilling even in hot ambient temperatures in your garage or brewery.

For more specs, check out the Long Description

BrewZilla / Robobrew - Replacement Stainless Immersion Chiller for the 65 Litre model.

Coiled part of the chiller: 25cm high x 27cm diameter
Total height of the chiller: 40cm
Tubing: 12.7mm, 304 Stainless
Length approx 11M

The Grainfather counterflow chiller is used after boiling the wort to cool it down fermentation temperature. The counterflow does this by acting as a heat exchange between the wort and water from your tap as you transfer the wort from your boil kettle to your fermenter. Because this is a one-step process of transferring and cooling, it is more efficient and more sanitary than immersion chillers, and the curved design allows for similar performance to plate chillers without the crevasses that can make cleaning painful.