A redesigned perforated grain basket for the G30 Brewing System. Comes standard with the G30v3.

Can be purchased as an upgrade for previous versions of the G30 Brewing System.

Replacement angled Silicone Pump Tubes for the Grainfather S40 Brewing System.

Does not include clamps.

Buy a Grainfather G40 and receive a FREE Electric Grain Mill! This is a great bundle for all grain brewers, allowing them to mill their own grain and produce up to 40 L (11 US Gal) of beer from one brew.

*Cannot be applied to previous purchases or in combination with any other promotion or coupon code. Offer valid while supplies last.

We're excited to launch the Grainfather G30v3! It's the ultimate 30L brewing system, combining all the features you know and love from the original award winning G30, but with something new.

The G30v3 features a perforated grain basket. The new basket design provides an improved brewing experience with no top plate or additional pipework required, making for an even more efficient mash and an easier clean. It now also features rolled edge plates bringing it in line with the G40 and G70 units.

The G30v3 is an all-in-one brewing system with a 30 L (8 US Gal) capacity, designed to make up to 40 pints of high-quality beer from one brew. With Grainfather App integration, great features, and an intuitive design, it’s perfect for both beginner and experienced all grain brewers to master their all grain brewing journey.

Compatible with the T500 boiler and Mangrove Jacks SS fermenter.
Use with the G70 and G40 to allow quick drainage from the bottom of the unit.

The next must-have accessory for G30 users is here! You can now upgrade your G30 with Rolled Plates! Grainfather wanted to provide an accessory that brings the G30 more in line with the G40 and G70 which already include similar plates. These grain plates with rolled edges make the assembly and cleaning of the G30 a super sleek experience.

Includes 2 plates - 1 x G30 Rolled Top Plate (with handles), 1 x G30 Rolled Bottom Plate

Please note - the G30 will continue to be sold with the original grain plates and silicone seals, and the new Rolled Plates will be sold as an upgrade accessory only.

Grainfather safety valve

This is the housing for the ball & spring at the top of the pump pipe - which so many of us take out on day one to get better flow :-)

This item does not include the ball & spring.

The ultimate brewing system with a gigantic 70L capacity, allowing you to create 60L batches of beer at a time. Now featuring a new perforated grain basket and an integrated sight glass now as a part of the recirculation pipework.

Note: requires 15 amp power to operate.

Easy to assemble, this simple addition fits between the overflow inlet and the top mash plate and prevents particles moving down the overflow pipe.

Dimensions: Outa-170mm, centre hole -23mm 
Mesh size - 600 micron

The bag is made from robust and tough, nylon material that will keep the Grainfather free from dust, contaminants and exterior moisture and is perfect for transporting your Grainfather.

Simply place the bag on the floor, place the base of the Grainfather inside of the bag and roll the bag up over the Grainfather. The excess material rolls and then clips together for a tight seal, keeping the Grainfather clean and safe until your next brew.

With the Grainfather Sparge Water Heater 40L, brewers can heat and keep up to 40L of sparge water at a specified temperature until it's needed. This means they can focus on the rest of their brew day, without having to worry about how or when they're going to heat large volume of sparge water, and avoid the need to use 2 (or more) smaller volume heaters.

The unit heats up to 40L (10.6 US Gal) of sparge water in approx. 50 minutes, so brewers simply start heating during the mash, and they can forget about it until it's time to sparge.

Standard rolled grain plate for the Grainfather G40 Brewing System.

Can be used as an additional top plate to make brewing higher ABV beers easier by keeping large amounts of grain in the basket.
This also increases efficiency during sparging.

A 15 amp cable provides a huge power boost when compared to the 10 amp power cable that comes as standard with the G40 and G70, meaning shorter heating times and a more vigorous boil.

Please note, as 10 amp is the standard domestic amperage in New Zealand, the 15 amp cable requires additional outlet and work done on the powerboard.

The Grainfather G40 Brewing System has a bigger capacity and better connectivity. Produce up to 38L of beer from one brew and connect your mobile device to the smart controller with built-in wireless control via the Grainfather App, for step-by-step brewing and access to thousands of recipes.

NOTE: Due to its size and weight this item is unable to be sent via courier and needs to go via a freight company which leads to a higher shipping cost.
If you have a business delivery address, we may be able to cut the shipping cost down. Please get in touch for more info. 

This motorised, adjustable, easy-to-use Electric Grain Mill makes light work of crushing grain at home, so you can brew fresher beer!

- Motorised all-in-one Grain Mill
- Large, fluted rollers for maximum crushing
- Adjustable crush & speed settings

The perfect purchase for all-grain brewers who want to go one step further and crush their own grain, or upgrade their existing mill. The Grainfather Electric Grain Mill makes efficient grain crushing easy - simply add a bucket to collect the crushed grain. The custom-built grain hopper holds 1KG of grain at a time - simply continuously top-up as you go!

This bundle includes the Bamboo Mounting Board for secure and sturdy mounting to your grain bucket.

Bamboo Mounting Board for use with the Grainfather Electric Grain Mill.

For secure, sturdy mounting to your grain bucket.