This is a replacement wire support for the BrewZilla 35L model. It can also be used on the Digiboil 35L model so you can use a malt pipe with the Digiboil 35L boiler.

This is a replacement malt pipe for the BrewZilla 35L model. It can also be used on the Digiboil 35L model so you can use a malt pipe with the Digiboil 35L boiler.

270mm Diameter
385mm High

Our unique design in the new Gen3 handle allows you to set up a rigging device without the attatchments slipping to either side of the handle. 

*Malt Pipe Not included*

Brewzilla Boiler Extension - for 35L and 65L units. Also suits Digiboils as well.

Ever wanted to punch out a few more litres of wort with your BrewZilla? Maybe you wanted more strike water for a super sticky batch. Maybe you get boil overs a lot and would like a bit of extra protection. Now theres a solution! The all new BrewZilla boiler extension that allows 12L headroom on a 35L unit and 24L on a 65L.

Turn that a 35L BrewZilla into a 47L behemoth, or the 65L Brewzilla to 89L! 

The BrewZilla Gen 4 is designed to be a compact single vessel all grain home brewing system that can be run off a single 220-240v socket. A complete turnkey system with a delay timing feature and step mash functionality. Built to make batches up to 30L, it is the ideal solution for those who want to take the first step in all-grain brewing while also wanting full control of their batch from start to finish.

Fast to setup, brew and clean up is easy The very simple design is easy and intuitive to use.

The BrewZilla Gen 4 is designed to be a compact single vessel, double batch all grain home brewing system that can be run off a 15 amp socket.
A complete turnkey system with a delay timing feature and step mash functionality. Built to make batches up to 60L, it is the next stepping stone up from the 35L BrewZilla model, being the ideal double batch system for those who want full control of their brew from start to finish.

BrewZilla Gen 4 Neoprene Jacket / Parka with Recirculation Arm Cover

New and improved BrewZilla Gen 4 Neoprene Jacket for more stable mash temperatures and heat retention. Now made with 8mm thick neoprene, improved recirculation pipe insulation on both the boiler and the recirculation camlock arm.

If you brew outside where it is cold or windy, the Neoprene Jacket/Parka is a must-buy! Don't lose that heat to the atmosphere!

Available for both 35L and 65L Brewzilla Gen 4 units.

This board will allow you to upgrade from Brewzilla 3.1 to 3.1.1 to take advantage of some new features.  To see the difference or to do the upgrade you can see this instruction sheet that explains this upgrade in more detail.

If you currently own a 3.1 unit all you will need is the LCD Control Panel. You will not need a new PCB Board (Power Board)

From: Kegland

A replacement lid (no handle knobs) for your Robobrew / Brewzilla, with centre hole. Black knobs for the lid are sold separately.

BrewZilla Whirlpool Arm - Suits 35L & 65L

The BrewZilla Whirlpool Arm is a new accessory that suits both the 35L model and 65L. This accessory fits onto the existing recirculation pipe with a stainless steel male Camlock fitting. The 6w internal magnetic pump will aid in circulating your wort for better hop extraction in the whirlpool stage, as well as help collect the hot break into the centre of the false bottom.

Other benefits may include speeding up cooling times by more movement of the wort in the boiler.

A replacement Robobrew / BrewZilla 35L False Bottom.

This attachment stops particulates from blocking your pump and getting into your beer.

Designed to be used on Gen. 3.1 Robobrew / BrewZilla 35L units.

From: Kegland

Put up your hand if you've smashed or lost one of these BrewZilla glass lids, the answer will shock you!

We all do it, but if you're wanting to keep everything the same and want to be able to re-sell your BrewZilla, we'd recommend purchasing it for a full set.

Made from stainless steel and to suit the BrewZilla 65L Model Malt Pipe

This is a replacement wire support for the BrewZilla 65L model. It can also be used on the Digiboil 65L model so you can use a malt pipe with the Digiboil 65L boiler.

Replacement bottom screen for malt pipe. Can be used on Generation 3 to 3.1 models.

This attachment stops particulates from blocking your pump and getting into your beer!

It can also be used on the 65L DigiBoil as a false bottom.


Please note: It does not come with the eye-bolt and locking nuts.

If you are an experienced single vessel brewer and don't use the overflow pipe. This malt pipe screen is the perfect upgrade for just that!

This is a replacement malt pipe for the BrewZilla 65L model. It can also be used on the Digiboil 65L model so you can use a malt pipe with the Digiboil 65L boiler.