All-in-one Systems
-
$17.95BrewZilla + DigiBoil S.S Adjustable Lid Clamps - Short (4pcs/set)
Get the exact tension you need with your BrewZilla, DigiBoil or even GrainFather with Kegland's Stainless Steel Adjustable Clamp Set. Adjust to your specification.
This set of 4 adjustable stainless steel clamp set suits the 35L and 65L BrewZilla Gen 3 all the way to Gen 4 as well as all 35L and 65L DigiBoils. It also suits the 12L and 24L Boiler Extensions.
-
$24.95BrewZilla Gen 4 - Heat Exchanger Dish (HED)
What does it do?
Due to the concave bottom and central draining hole, the wort being recirculated through the pump will pass through the malt pipe and then down through the boiler false bottom. The wort would normally then follow the path of least resistance, making a b-line for that drainage hole.What this Heat Exchanger Dish does is force that recirculating wort up to the edge of the BrewZilla base and pass over the elements for a longer period, this then aids in faster heating exchange with the wort, which can help you on a brew day reach those temperatures much quicker.
This is an upgradeable accessory to the 35L BrewZilla Generation 4 only. It is not compatible with any previous generations of BrewZilla, RoboBrew or DigiBoils.
-
$29.95BrewZilla Double Pulley Set
This double stainless steel pulley set will make it easy to lift your malt pipe from your BrewZilla, Robobrew, Grainfather, Braumeister, Brewtools, or other single vessel brewery.If you are looking for the easy way to lift your malt pipe from your single vessel brewery then this is the easy way to do it. The setup includes all the parts you need. Simply screw the shackle into the roof or overhead beam and then secure the wall cleat and away you go. It will only take a couple moments to install. The double pulley is used so it's possible to lift the large malt pipe in the 65L BrewZilla unit.This stainless steel pulley set has been made from all 304 grade stainless steel, nylon and non-corrosive materials.Out of Stock -
$38.5035L BrewZilla Gen 3 - Bottom Screen for Malt Pipe with threaded socket
Replacement bottom screen for malt pipe. Can be used on Generation 2 models.
-
$25.00BrewZilla 35L - Replacement Top Screen for Malt Pipe
This piece helps when using the over flow pipe to not get grain into the boiler.
-
$69.95BrewZilla 35L - Replacement Malt Pipe
This is a replacement malt pipe for the BrewZilla 35L model. It can also be used on the Digiboil 35L model so you can use a malt pipe with the Digiboil 35L boiler.
270mm Diameter
385mm HighOut of Stock -
$29.9535L + 65L BrewZilla Gen 3.1.1 - LCD Display Screen (control panel)
This board will allow you to upgrade from Brewzilla 3.1 to 3.1.1 to take advantage of some new features. To see the difference or to do the upgrade you can see this instruction sheet that explains this upgrade in more detail.
If you currently own a 3.1 unit all you will need is the LCD Control Panel. You will not need a new PCB Board (Power Board)From: Kegland
-
$19.90Brewzilla Replacement Glass Lid 35L with hole
A replacement lid (no handle knobs) for your Robobrew / Brewzilla, with centre hole. Black knobs for the lid are sold separately.
-
$5.95Stainless Flexi Arm
Stainless Flexi Arm 40cm with 1/2inch BSP Hex Nut Female.
Perfect for sparging arms, recirculation piping for the 35L and 65L BrewZilla. Please note you will need a Male Camlock to Male 1/2" BSP Thread (F Type) in order to attach to your BrewZilla recirculation arm (sold separately).
From: Kegland
-
$29.95BrewZilla 65L / DigiBoil 65L - Replacement Glass Lid (420mm) with Hole (no handle knobs)
Put up your hand if you've smashed or lost one of these BrewZilla glass lids, the answer will shock you!
We all do it, but if you're wanting to keep everything the same and want to be able to re-sell your BrewZilla, we'd recommend purchasing it for a full set.Out of Stock
