Equipment
-
Still Spirits Air Still Pro
The Air Still Pro is a small-batch, 2-in-1 distillation system that allows you to craft high quality light and dark spirits. With a multi-purpose condenser and interchangeable distillation tips, the Air Still Pro enables you to produce clean, neutral spirits at up to 90% ABV in reflux mode and make flavoursome and botanical-infused spirits at up to 80% ABV in the pot still mode.
-
Alcoengine Copper Reflux Still Bundle - 65L
This complete bundle is designed for enthusiasts wanting to make clean pure neutral spirit either for Vodka’s or to flavour with essences into liquors or other flavoursome spirits.
The whole system is designed to save, time, money and parts, and fit in one box for easier storage and cheaper shipping.
Out of Stock -
Alcoengine Copper Reflux Still Bundle - 35L
This complete bundle is designed for enthusiasts wanting to make clean pure neutral spirit either for Vodka’s or to flavour with essences into liquors or other flavoursome spirits.
The whole system is designed to save, time, money and parts, and fit in one box for easier storage and cheaper shipping.
Out of Stock -
2inch Tri-Clover Extension Tube ( Sanitary Spool )
Made from 304 food grade stainless steel and compatible with all standard 2inch tri-clover, tri-clamp, ferrule fittings.
Out of Stock -
35L DigiBoil - Digital Turbo Boiler 2400watt
This digital turbo boiler is a quality made 304 grade stainless steel turbo boiler.
A good alternative to the T500 boiler.
The 35Liter size is the total rated size brimful, so typically if you are using this as a beer boiler you would probably only fill it up to 25-30L so you had 5-10 litres of head space to boil comfortably.
The boiler has a quality made stainless tap with stainless barb and 1/2inch thread so you can attach the wide range of other half inch fittings such as camlocks and many other fittings that we can supply.
Out of Stock -
Still Spirits Air Still 240V / 320W
The Air Still is the fast and simple way to make your favourite spirits and liqueurs at a fraction of the cost. Finally...a still to take its place amongst everyday kitchen appliances! It looks like a kettle, works like a kettle - but it makes alcohol!
The Still Spirits Air Still system uses a revolutionary still that will be right at home amongst your everyday kitchen appliances. Stainless steel body, built in air cooling system so it uses absolutely no water for cooling - great for regions where water shortages are a problem.
Distillation takes just two hours and produces enough alcohol each time to make a 1 L bottle at 38-40% ABV. No compromise on quality. Revolutionary non-technical design. No hoses, no complicated assembly ... just plug and play! As simple to operate as the kitchen kettle, Great value for money, safe and easy to use which is ideal for the new distiller, can be used for alcohol distillation and water distillation.
For the Air Still you will also need the Air Still Carbon Cartridges, Air Still Companion Pack and Air Still Fermentation Kit.
-
Still Spirits T500 Lid for Boiler (48mm hole)
Still Spirits T500 Lid for Boiler (48mm hole)
This is the cheapest way to turn your Grainfather into a still.
With this lid you can attach all T-500 columns (reflux & pot) to your Grainfather. (seal sold separately) -
Nylon Hose Brush - Long - 3/8"
A long Nylon Hose Brush for beer line cleaning on your kegging system.
Size: (3/8") x 66" (167cm)
Made by: Krome DispenseOut of Stock -
Heavy Duty Brewing Gloves – 55cm long
These heavy duty brewing gloves are made from vulcanized latex, ideal for cleaning around the brewery or even the home. Seriously long for getting those arms deep into Kegmenters, Fermzillas and those brew pots.
Tough chemical resistant material provides good protection to your hands during clean-up and sanitary handling of equipment. They are 55cm long so will also protect the forearm when reaching into harsh cleaning chemicals.
Out of Stock -
Bottle Brush, Small Tip
Bottle Brush, Small Tip. Just over 45cms in length, with a solid wire construction. There is a further 4cms of bristles shaped like a long paintbrush .The end piece is small enough to fit inside most standard bottle necks. Has a hooked handle allowing you to hang it up when not in use.
-
Bottle Brush, Fantail type
Bottle Brush, Standard Small Tip. The length from the handle end to the end of the main part of the brush is 52cms, helpful for getting in to small nooks and crannies. The end is small enough to fit inside most standard bottlenecks.
Out of Stock -
Nylon Hose Brush - Long - 3/16"
A long Nylon Hose Brush for beer line cleaning on your kegging system.
Size: 3/16" (3mm) x 66" (167cm)
Made by: Krome Dispense
Nylon Hose Brush - Long - 3/16"
Makes cleaning draft and beverage lines easy with this long handled nylon bristled hose brush.
The importance of properly cleaning beer lines is often understated. In fact, improper line cleaning is likely the single most likely cause for poor quality customer beer. Clean your draft lines with the proper cleaners and equipment regularly for high quality beer.
-
CCC (Copper Catalytic Converter) Reflux Tower Pad
Essential for all alcohol stills. The CCC uses a specially manufactured pure copper micro ribbon which has a large surface area to instantly react with the sulphates turning them into odourless, tasteless compounds. This action neutralizes the rubbery cabbage odour which taints the spirit. Clean after each distillation with Copper Cleaning Agent (CCA)Out of Stock -
Essencia Dome Ceramic cartridge
The ceramic dome cartridge is used in the Essencia Spirit Filters double cartridge setup.
Filters out chlorides in the water.
Can filter up to 300L of water.
-
KegLand Distilling Parrot - Stainless Steel
What is a Distilling Parrot?
A distillers parrot is a piece of kit that allows you to take alcohol gravity measurements using an Alcometer continuously throughout your pot or reflux run. It should be placed inline of your distillation outlet so that the drops of distillate fall directly into the tallest collection cone. But only placed in-line AFTER you collect your foreshots.
You will then place your Alcometer gently into the lower cone piece (be careful not to drop it in without any liquid/distillate in there, as Alcometers are fragile)
Specifications- 304 Stainless Steel Construction
- Holds up to 105mL +- 5mL (without alcometer)
- 0.86kg in total weight.