The perfect pocket kit for brewday, we wouldn't leave home without one! Either weigh out your salts bare knuckled on the stainelss steel pad, or use a small cup and TARE to zero. Ideal for adjusting your pH with brewing salts, as well as measuring out your hops and granulated whirlfloc.

TILT Hydrometer

Make brewing easier and more accurate with the Tilt Hydrometer. Check the specific gravity and temperature of your beer while it’s fermenting, without ever having to open your fermenter or pour out any of your precious brew. You can instantly read your brew's specific gravity and temperature on your compatible mobile device. It’s even compatible with the Grainfather App. See TILT Apps for more detail.

Available in red, blue, yellow and green. Please, note that if using multiple Tilt Hydrometers for different batches of beer, you’ll need to use a different colour for each batch. The app will not read multiple hydrometers of the same colour.

Each Tilt comes calibrated and ready to go with a pre-installed battery that lasts 12-24 months depending on usage. Just download the free app, sanitize your Tilt, drop in your fermenter, and start taking readings with your mobile device.

The specific gravity is accurate +/- 0.002 within the Tilt's range of 0.990 to 1.120. The thermometer is accurate +/- 1 degree F (+/- 0.5 degree C).

pH Buffer Solution - 3 Pack (4.00 / 6.86 / 9.18)

In order to keep your PH meter as accurate as possible, you will need to calibrate using our three buffer solutions. 
We would strongly recommend if you haven't used your ph meter in a while to always use a buffer solution before you start your brew.
If you do not have anyStorage Solution, we would also highly recommend you use this solution for storage after every use.
Directions for use:
1. Completely empty the powder into a clean 250mL glass beaker.
2. Add 250mL of deinoized water to the beaker.
3. Stir until the powder has completely dissolved.

pH solution is accurate to (-+) 0.01pH

These digital scales are ideal for accurately measuring:

• Hops
• Specialty Malt
• Yeast Starters
• Cleaning Powders
• Disposable Cylinders
• Most items up to 10kg

It is not suitable for weighing under 5g accurately.

Brand new replacement lid for corny kegs complete with new seal and pull-ring pressure relief valve.

Replacement Low2 keg lid o-ring seal for corny keg lids. Suitable for any 19L, 9.5L corny keg - ball lock or pin lock.

Also suits FermZilla 2" tri-clamp pressure lids.

Replacement o-ring for keg dip tubes.

One of the many cornelius spare parts and accessories that we stock to help people building or maintaining any kegerator or keezer.