Other Homecrafts
-
Mangrove Jack's 10L Mini Keg Kit
Portable size Can pressure carbonate (using the ball lock cap) No bottling or wasting that little bit left over from standard sized 23L batches and a 19L keg Perfect for smaller experimental batches Handles for easy transportation Stainless steel body Embossed logo Kit Contents: Mangrove Jack's Mini Keg 10L Mangrove Jack's Mini Kegs Ball Lock Cap Mangrove Jack's Mini Kegs Diptube Hosing NOTE: These do not come with a tap, however they can be used with and ball lock tap and therefore complement existing kegerator setups. Keg dimensions (assembled) 550mm H x 170mm W -
Mini Keg - Ball Lock Tapping Head
Mini Keg - ball lock tapping head with silicone dip tube designed to fit the Kegland Mini Kegs. Same connectors as the standard corny kegs for easy beer transfer and carbonation.
The thread on these mini kegs is 1inch 16TPI.
From: KeglandOut of Stock -
Caps for PET Bottles (white or black) (50)
A bag of 50 white caps that can be used on any sized PET bottle. Includes a tamper-resistant seal that lets you know if a bottle has been opened.
-
HS ECD Cold Water Cleaner/Detergent 250g
Effectively cleans and deodorises everything you use for brewing, winemaking and distilling. Cold Water ECD Cleaner Detergent is a powerful cleaner removing dirt, stains and undesirable micro-organisms, restoring your surface to its original condition.
Out of Stock -
BrewKeg Oval Lid Seal
Replacement o-ring lid seal for an oval lid Williams Warn BrewKegOut of Stock -
KegLand Mini 360 Core Actuator Regulator - Sodastream & 16g & 74g Bulb Compatible
Features:
- Core Puncturing / Actuator - Zero gas lost to screwing in bulbs or Sodastream style cylinders.
- Interchangeable ball lock disconnect orientations (e.g. 45° Premium Ball lock to 90° Stainless Disconnects)
- 6.5mm duotight compatible hose barb, can also suit hose and stepless clamps (e.g. 4mm ID, 5mm ID or 6mm ID hose)
- Heavily Protected Mini Guage Dial. (Also interchangeable to different ranges)
- Common Pressure relief valve compatible. (65psi Green PRV as standard, compatible with 35psi Red and 100psi Grey) -
2L Stainless Mini Keg
Mini Keg with 2 litre capacity are specifically designed for home brewing/growler dispensing. They are suited to small batches and to people who want to fit them into their standard domestic fridges.
This mini keg system is great as a portable keg to take to parties, BBQs, or just having a few beers in the sun.
The 2L size is equivalent to around 6 x 330ml bottles of beer.
You can naturally carbonate using priming sugars or preferably force carbonate and serve your beer with the ball lock lid/tapping head.
-
Brewmaster Beer Line Cleaner
500ml Sterilser, sediment cleaner for all beer lines and kegs
Approved by all major breweries
Circulate a 5% solution (100ml in 2 L warm water) for 15 minutes. Rinse thoroughly with warm water
ANZFSA C38 Approved
Alkaline Sats 25%
Manufactured in Auckland, NZ
-
Mini Keg 5L (175mm x 280mm)
This small sized mini keg is conveniently shaped so it will fit into most coolers/eskys. This size will also will fit most standard domestic fridges so it's easy to store without having to buy a new fridge.
The 5L size is equivalent to 15 x 330ml Bottles of beer.
Out of Stock