Wine Making
-
$8.95Rubber stopper / bored bung. #10 w/airlock hole (for plastic carboy)
Rubber stopper / bored bung #10 with airlock hole.
Fits our 11.5l & 23l plastic foodgrade PET carboys perfectly.
#10 size is a standard bung size, in this case 41mm diameter across on the small side, going to 51mm on the wider side. -
$4.95Bored Bung 28-30mm
Demijohn Bored Bung 28-30mm - with an airlock hole.
Fits perfectly a 5l (FLIP TOP ONLY) glass demijohn for a tight seal.
Not compatible with the wide mouth screw top demijohns.Typically made from rubber or silicon.
-
$2.70Tophat Grommet
The top-hat or T-shaped grommet is a popular choice for use with an airlock in a fermenter lid. Tophat grommets are more robust than the black doughnut shape alternatives which can become damaged, however they are more easily popped out if there is excessive pressure build up in your fermentation vessel due to a blocked airlock. -
$9.00Stopper without hole 38mm–46mm (fits wide mouth 5L demijohn)
Stopper without hole #9.5 38mm–46mm - fits the HS 5L Glass Demijohn with Cap (wide mouth)
-
$8.50Stopper with hole 38mm-46mm (fits wide mouth 5L demijohn)
Stopper with hole #9.5 38mm-46mm - fits the HS 5L Glass Demijohn with Cap (wide mouth)
-
$4.95Silicone Bung 20 x 35 Solid
Solid silicon bung that is tapered - 20mm-35mm. Please note that this is a solid bung - no hole for airlock.
-
$4.95Bung (with hole) - 20-35mm
Silicon bung with hole for airlock. Tapered - 20mm-35mm. Suitable stopper for most carboys and flasks.
-
$4.003/4" threaded barrel bung for plastic fermenters / cubes PC4904
3/4" threaded barrel bung for plastic fermenters / cubesOut of Stock -
$30.00STC-1000 Temperature Controller-Bare
The STC-1000 is a temperature controller you can use to control your fermentation temperature. It has a hot and a cool circuit which you can use to heat and ferment your wort depending on the setting of your controller. This is a bare bones controller, and you need to assemble the controller yourself.
The easiest way to do this is to buy two cheap extension leads which you can use for all wiring and plugs/sockets, and then assemble into any suitable housing such as a Systema box.
There are lots of easy to follow wiring videos available on Youtube.
Comes with a 1 meter long temperature probe.
Model -240V
-
$35.00HS Heat Belt
For maintaining ideal fermentation temperatures by providing a gentle heat around the outside of your fermenter.
