Equipment
-
$15.00FermZilla - All Rounder 30L/60L Base Support Webbing / Strap / Bridle / Carry Tie Down
This handy little strap will make cleaning and transport your FermZilla All Rounder 30L or 60L an absolute breeze. Simply attach through both sections of the base in the orientation you wish. Slide up and out of the little buckle pieces making sure that the buckle is facing towards you, then strap in and strap down!
The Strap is long enough for the 60L FZ-AR and 30L. We recommend rolling up the excess strap and paper clipping or cutting to suit the 30L. -
$150.00Ss HD Caster Wheels - for Unitanks / Chronicals / Brites
A set of heavy duty, all-stainless caster wheels with brake, designed for harsh brewery wash-down environments. - ideal for use with 64 litre and 1 bbl vessels - 3" (7.62cm) wheel diameter - 3/8" x 1.5" zinc coated stem - 113kg load rating per caster - includes stainless washer leveling kit The installation Guide can be found here. Note: not suitable for jacketed unitanks
From: Ss Brewtech
Out of Stock -
$9.50Sterilock Odour Capsules (4)
For use with the Sterilock Airlock Contains 4 odour absorbing capsules to remove fermentation odours.
-
$9.50Sterilock Air Lock (with one odour capsule)
The Sterilock contains a patented nanoseal that removes fermentation odours and allows C02 gases to safely vent while preventing any contaminants (including bacteria) to enter the fermentation vessel.
-
$7.60Bored Bung 19mm - 26mm
Bored Bung 19mm (Barrel) (19mm to 27mm) - red rubber with an airlock hole.
Compatible with the Mangrove Jack's Stainless Stell fermenter. -
$4.50Demijohn Solid Bung 28mm-30mm (23L Jar) (28mm to 32mm)
Demijohn Solid Bung 28mm-30mm (23L Jar) (28mm to 32mm)
Fits 23l glass carboys and 5L demijohns.
-
$7.40Thermometer Bung 22mm. Black (22mm to 28mm)
Thermometer Bung 22mm. Black (22mm to 28mm). This bung has a smaller diameter bore than a standard bored bung, which makes it suitable for mounting a 30cm Glass Thermometer (available separately). -
$0.95Black Grommet for airlock hole in fermenters
A "doughnut" shaped black grommet for the standard airlock hole in plastic fermenters. Compatible with both Senior and Vintage airlock type. Has a centre groove which allows it to clip into the fermenter lid, making it more resistant to being pushed out if pressure builds up during fermentation. -
$8.10Rubber stopper / bored bung. #10 w/airlock hole (for plastic carboy)
Rubber stopper / bored bung #10 with airlock hole.
Fits our 11.5l & 23l plastic foodgrade PET carboys perfectly.
#10 size is a standard bung size, in this case 41mm diameter across on the small side, going to 51mm on the wider side. -
$4.10Bored Bung 28-30mm
Demijohn Bored Bung 28-30mm - with an airlock hole.
Fits perfectly a 5l (FLIP TOP ONLY) glass demijohn for a tight seal.
Not compatible with the wide mouth screw top demijohns.Typically made from rubber or silicon.
