This coloured housing allows you to customise your RAPT Pill. This is purely aesthetic and means you can easily differentiate multiple RAPT Pills from each other.

Does not include clear Pill Housing and double o-rings shown in the images

RAPT Pill circuit board sold seperately

This coloured housing allows you to customise your RAPT Pill. This is purely aesthetic and means you can easily differentiate multiple RAPT Pills from each other.

Does not include clear Pill Housing and double o-rings shown in the images

RAPT Pill circuit board sold seperately

Replace your RAPT Pill bottom housing with the RAPT Clear Housing shell. Please note there are no clear top pieces for the RAPT Pill at this stage.

RAPT Pill circuit board sold Separately
RAPT Pill O-Ring Set Sold Separately

Replacement Silicone O-ring for RAPT Pill

It is always wise to have a few spares in case some get pinched when tightening up the RAPT Pill.

Please note: The price is for a single O-ring. Each RAPT Pill requires 2 O-rings.

TILT Hydrometer

Make brewing easier and more accurate with the Tilt Hydrometer. Check the specific gravity and temperature of your beer while it’s fermenting, without ever having to open your fermenter or pour out any of your precious brew. You can instantly read your brew's specific gravity and temperature on your compatible mobile device. It’s even compatible with the Grainfather App. See TILT Apps for more detail.

Available in red, blue, yellow and green. Please, note that if using multiple Tilt Hydrometers for different batches of beer, you’ll need to use a different colour for each batch. The app will not read multiple hydrometers of the same colour.

Each Tilt comes calibrated and ready to go with a pre-installed battery that lasts 12-24 months depending on usage. Just download the free app, sanitize your Tilt, drop in your fermenter, and start taking readings with your mobile device.

The specific gravity is accurate +/- 0.002 within the Tilt's range of 0.990 to 1.120. The thermometer is accurate +/- 1 degree F (+/- 0.5 degree C).

pH Buffer Solution - 3 Pack (4.00 / 6.86 / 9.18)

In order to keep your PH meter as accurate as possible, you will need to calibrate using our three buffer solutions. 
We would strongly recommend if you haven't used your ph meter in a while to always use a buffer solution before you start your brew.
If you do not have anyStorage Solution, we would also highly recommend you use this solution for storage after every use.
Directions for use:
1. Completely empty the powder into a clean 250mL glass beaker.
2. Add 250mL of deinoized water to the beaker.
3. Stir until the powder has completely dissolved.

pH solution is accurate to (-+) 0.01pH

These digital scales are ideal for accurately measuring:
- Hops
- Specialty Malt
- Yeast Starters
- Cleaning Powders
- Disposable Cylinders
- Most items up to 10kg

It is not suitable for weighing under 5g accurately.

Single use pH calibration buffer sachets. 

These buffer solutions are produced using high purity salts, deionised water, certified weight-checked balances, and Class A glassware in a temperature controlled environment monitored with certified thermometers. Reported values are accurate to +/- 0.01 pH @ 25°C and are traceable to NIST Standard Reference Materials (SRMs).

Convenience of individual packaging:
- Ideal for users that do not calibrate frequently
- Ideal for field use due to portability
- Every sachet is as fresh as the day it was packaged
- Light block packaging prevents oxidation from UV light that could alter the buffer value