Wine Making
-
$28.00Easy Siphon 580mm
A 580mm Easi-syphon, perfect for automated siphoning. Long enough to use in a 23L PET carbouys or for siphoning out of a 30L brewing bucket.
Compatible with the 7.9mm siphon hose which is sold separately. -
$2.30Racking Cane Holder 3/8"
Racking Cane Holder to help hold your siphon or racking cane. Clips onto the side of plastic fermenters or to the neck of any carboy. Hose clip is 3/8" (0.925cm).
Turns a job that sometimes needs three hands into one that only needs two. -
$2.27Plastic siphon tube / hose 7.9MM ID - per metre
This is a bulk product - one unit equals 1 meter.
This hosing is 7.9mm inside diameter and is great for siphoning beer from one vessel to another. It is available in any length up to 25m. It is made of clear, non-toxic plastic and is suitable for contact with any food-grade liquid.
Not recommended as a beer line that holds beer over long periods of time. We recommend Ledavin as a beer line instead. -
$3.20Valpar Natural Tube 1/4" OD x 3mm ID
This is a bulk product - one unit equals 1 meter.
1/4" Valpar Natural Tube, suitable for gas or beer line in your kegging set-up. This is stiff material and can be used for push in fittings. -
$12.005/16" John Guest Equal Tee
Commercial grade Equal Tee fitting, ideal for splitting your gas line to supply more than one keg. -
$49.95Auto Siphon Racking Cane Easy Jiggler - Stainless (57cm)
For siphoning out of a carboy, demijohn, bucket or FermZilla. This siphon includes 150cm x 10mm ID silicone tube.
This whole assembly is plasticiser and BPA free. It will not break like the plastic auto siphons or polycarbonate designs.
It's made robust out of 304 grade stainless steel and is really easy to take apart for cleaning. It's more versatile than a conventaional racking cane and easier to start but at the same time similarly simple to use and clean.
Out of Stock -
$16.95Heavy Duty Silicon Tube Hose (various sizes available)
Silicone hose for liquid transfer. It is resistant to constant high temperatures and will handle temperatures above boiling point, and has excellent chemical resistance. The soft silicon is easy to work with and seals very well.
Please note that this tube should not be used for pressure above 15psi (such as mains water pressure), and has a burst pressure of around 30psi.
-
$3.00EvaBarrier 3mm ID - 6.35mm OD hose / tube
Swap out your 4mm or 5mm hosing for this smaller internal diameter 3mm hosing coupled with 6.35mm duotight ball lock disconnects (KL24242 and KL24235) for a neat and tidy kegerator, keezer or cellar set up. This sized hosing is perfect for your series X or Series X plus to reduce the bundle of beer line sitting on top of your kegs.
Out of Stock -
$3.00EvaBarrier 5mm ID - 8mm OD hose / tube
This new 5mm ID EVA Double walled tubing is made with an EVA outer wall and also an inner proprietary polymer barrier. Perfect for gas line.
The outer barrier has accurately extruded tolerances and made from an EVA material. It also seals well when used with various DuoTight, John Guest or other push in fittings.
Pressure Rating (with 1.5safety factor)
30C - 1.4 MPa (200psi)
50C - 0.7MPa (100psi) -
$3.00
EvaBarrier 4mm ID - 8mm OD hose / tube
This high quality beer line will keep your previous beverage in it's best possible conditoin in the process.
When using this 4mm ID size you will get adequate flow resistance with 1.5meters to 2.1meters of beer line between your keg and tap suitable for most kegerator setups.
Pressure Rating (with 1.5safety factor)
30C - 1.4 MPa (200psi)
50C - 0.7MPa (100psi)
