A multi-purpose digital thermometer with stainless steel probe.

Range: -50 to 300C
Display Resolution : 0.1C
Probe material: 4mm stainless steel
Overall dimensions (L x W): 245 x 25mm
Battery: 1 x 1.5V (LR44)

pH Buffer Solution - 3 Pack (4.00 / 6.86 / 9.18)

In order to keep your PH meter as accurate as possible, you will need to calibrate using our three buffer solutions. 
We would strongly recommend if you haven't used your ph meter in a while to always use a buffer solution before you start your brew.
If you do not have anyStorage Solution, we would also highly recommend you use this solution for storage after every use.
Directions for use:
1. Completely empty the powder into a clean 250mL glass beaker.
2. Add 250mL of deinoized water to the beaker.
3. Stir until the powder has completely dissolved.

pH solution is accurate to (-+) 0.01pH

These digital scales are ideal for accurately measuring:

• Hops
• Specialty Malt
• Yeast Starters
• Cleaning Powders
• Disposable Cylinders
• Most items up to 10kg

It is not suitable for weighing under 5g accurately.

Replacement Low2 keg lid o-ring seal for corny keg lids. Suitable for any 19L, 9.5L corny keg - ball lock or pin lock.

Also suits FermZilla 2" tri-clamp pressure lids.

Brand new replacement lid for corny kegs complete with new seal and pull-ring pressure relief valve.

Replacement o-ring for keg dip tubes.

One of the many cornelius spare parts and accessories that we stock to help people building or maintaining any kegerator or keezer.

Corny Keg Post O-Ring
This goes on the outside of the post at the top. O-Rings should be regularly checked to prevent leaking of CO2 or beer.
This one is made of silicon which performs better at low temperatures than rubber.

Dimensions - 11.5mm ID 16mm OD.