Includes:

1 x Airlock
1 x 4 inch Flat Plate with hole
1 x Bung (Bored)
1 x Beaded Silcone Seal
1 x 4 inch Tri-Clover Clamp

A stainless steel handle for FermZilla units. These handles are made from 304 stainless steel and suit the large family of FermZilla fermenters/uni tanks/bright tanks.

The handles are made from 5.5mm thick 304 grade stainless steel and held together with stainless bolts.

These handles are suitable to take load up to 100kg.

If a glycol chiller is a bit out of reach at the moment, but you want to use the Temp Twister in your Kegmenter or FermZilla, this little product can help you on your way to cool your fermenter. Simply submerge the pump in a large bucket with water and ice.

If this product is out of stock stock, we can order them in for our customers. If you wish to find out more about this product, please contact us.

Chronical 2.0 is a massive evolutionary leap forward, but it has also stayed true to the product line's core. The full-width lid, a revolution when the original Chronical launched is retained, the pro inspired 60° cone, and bottom dump port is still here. And last but not least, the ever-popular neoprene jacket from the Chronical Brewmaster Edition is standard on Chronical 2.0.  This means that every Chronical 2.0 has a coil and jacket included as standard.

Two sizes available:

• 26 Litre (7 Gal.)
• 64 Litre (17 Gal.)

Heavy duty 100mm diameter castor wheels for your Series 4 or Series X kegerator. Each wheel has a polyurethane tread and steel bearings, and they are rated at 100kg per wheel. Includes 2x locking wheels and 2x non-locking.

NOTE: The wheels with the brake need to be on the non-hinged door side as the door hinge interferes with the brake mechanism.

Standard 30L fermenter bucket with lid.

Kit contains:

• Litre markings (etched on outside)
• Bored lid - for the airlock.
• Thermometer strip
• Airlock
• Tap
• Grommet

The Series X Triple Tap Stainless Kegerator is perfect for anyone looking to put beer on tap at home or at a café, restaurant, or bar. It includes Nukataps, stainless steel font, and a MK4 CO2 Regulator. The only additional parts you will require are the gas cylinder and kegs.

The Series X Quadruple Tap Stainless Kegerator is perfect for anyone looking to put beer on tap at home or at a café, restaurant, or bar. It includes Nukataps, stainless steel font, and a MK4 CO2 Regulator. The only additional parts you will require are the gas cylinder and kegs.

The Series X Single Tap Stainless Kegerator is perfect for anyone looking to put beer on tap at home or at a café, restaurant, or bar. It includes Stainless taps, stainless steel font, and a MK4 CO2 Regulator. The only additional parts you will require are the gas cylinder and kegs.

Note: this D-type kegerator is for the use of commercial kegs.