74g CO2 Cartridge | The Big Bulb | (5/8-18UNF Thread).

This CO2 Cartridge has a much larger thread than the standard 16g bulbs. It will require a different bushing if you are to use it with the 360 Core Mini Regulator. It does not suit other regulators in the KegLand range.

Traditional analogue gauges require a small capillary mechanism where a small pipe expands and unravels under pressure. This in turn drives a mechanical cog to rotate the gauge needle.  This age old technique works quite well especially in large gauges but as this mechanism is manufactured smaller and smaller a tradeoff between accuracy and size becomes the issue.  With very small gauges such as a 27mm x 27mm Mini Gauge it's difficult to make them better than 10% accuracy due to the physical constraints of the mechanical components.

A gas distributor for splitting your CO2 gas line into multiple outlets, with MFL connections. Options for two, three, and four outlets.

Connect just one cylinder to this gas distributor inlet and dispense from many beer kegs – all at the same time. You get the same pressure at all outlet points.

Stainless Steel 304 Wall Mounting Brackets and Screws Included.

Unlike our cheaper sodastream cylinder adaptors, this adapter has the added advantage that you can use the side thumb screw to depress the pin in the middle of the adaptor.  This pin adjustment makes the sodastream cylinder adaptor significantly easier to use.

A new 5kg CO2 (Alloy) bottle, supplied full. This bottle holds more CO2 than most in homebrewing. The bigger the bottle, the cheaper the CO2 refill per kg.

We believe this bottle is priced very competitively.

This product has to be shipped as "Dangerous Goods" so please allow a day or two extra for delivery.

These can be used with any kegerator as they are compatible with gas bottles with a standard thread. To use it with the new kegerators, you just need to remove the hose barb.

A CO2 Gas Cylinder Holder for securing one cylinder.

Simply mount onto the wall or similar (screws not included) and use the chain to wrap around the cylinder.

Need to set two different CO2 pressures for different beers on tap? Then you'll need two regulators to do it properly. With this MK4 Dual Pressure Regulator you'll be able to screw it into your CO2 bottle and fire away with two different pressures. No need to removing the High Pressure gauge off one regulator, buying an attachment and joining the two together.

See - Single CO2 Regulator - MK4 for the single version of this regulator.