Equipment
-
$2.30Racking Cane Holder 3/8"
Racking Cane Holder to help hold your siphon or racking cane. Clips onto the side of plastic fermenters or to the neck of any carboy. Hose clip is 3/8" (0.925cm).
Turns a job that sometimes needs three hands into one that only needs two. -
$28.00Easy Siphon 580mm
A 580mm Easi-syphon, perfect for automated siphoning. Long enough to use in a 23L PET carbouys or for siphoning out of a 30L brewing bucket.
Compatible with the 7.9mm siphon hose which is sold separately. -
$23.30Easy Siphon mini - 350mm
A 580mm long Easy syphon perfect for automated siphoning. Long enough to use in a 23L PET carboys or for siphoning out of a 30L brewing bucket.
Compatible with the 7.9mm siphon hose which is sold separately. We recommend 1.5M in length.*Does not work with regular Flip top style glass demijohns or 11.5L / 23L glass carboys - please see ( racking cane ) or auto siphon listing if you want to transfer from these carboys or demijohns.
Does work with our wide mouth demijohn
-
$16.95Heavy Duty Silicon Tube Hose (various sizes available)
Silicone hose for liquid transfer. It is resistant to constant high temperatures and will handle temperatures above boiling point, and has excellent chemical resistance. The soft silicon is easy to work with and seals very well.
Please note that this tube should not be used for pressure above 15psi (such as mains water pressure), and has a burst pressure of around 30psi.
-
$3.00EvaBarrier 3mm ID - 6.35mm OD hose / tube
Swap out your 4mm or 5mm hosing for this smaller internal diameter 3mm hosing coupled with 6.35mm duotight ball lock disconnects (KL24242 and KL24235) for a neat and tidy kegerator, keezer or cellar set up. This sized hosing is perfect for your series X or Series X plus to reduce the bundle of beer line sitting on top of your kegs.
Out of Stock -
$3.00EvaBarrier 5mm ID - 8mm OD hose / tube
This new 5mm ID EVA Double walled tubing is made with an EVA outer wall and also an inner proprietary polymer barrier. Perfect for gas line.
The outer barrier has accurately extruded tolerances and made from an EVA material. It also seals well when used with various DuoTight, John Guest or other push in fittings.
Pressure Rating (with 1.5safety factor)
30C - 1.4 MPa (200psi)
50C - 0.7MPa (100psi) -
$3.00
EvaBarrier 4mm ID - 8mm OD hose / tube
This high quality beer line will keep your previous beverage in it's best possible conditoin in the process.
When using this 4mm ID size you will get adequate flow resistance with 1.5meters to 2.1meters of beer line between your keg and tap suitable for most kegerator setups.
Pressure Rating (with 1.5safety factor)
30C - 1.4 MPa (200psi)
50C - 0.7MPa (100psi) -
$3.50EvaBarrier 6.3mm ID - 9.5mm OD hose / tube
This high quality beer line will keep your previous beverage in it's best possible conditoin in the process.
Pressure Rating (with 1.5safety factor)
30C - 1.4 MPa (200psi)
50C - 0.7MPa (100psi) -
$4.95Push fit 1/4" to 3/8" tube to hose adaptor
A 1/4" x 3/8" tube to hose adaptor with a 1/4" hose barb and a 3/8" push-fit connection. -
$14.95Diffusion Stone - 0.5 Micron (barbed)
A carbonation or aeration diffusion stone. This can be used as a way to aerate your wort prior to fermentation, or to speed up carbonation of the finished beer.
The barb fits 1/4" (6.35mm) ID tubing.
