Equipment
-
8cm Funnel
This funnel has a span of approximately 8cm, and an external diameter of approximately 0.7cm at the bottom. The overall height is approximately 7.5cm. -
15cm Funnel
This funnel has a span of approximately 15cm, and an external diameter of approximately 1.5cm at the bottom. The overall height is approximately 15.5cm.Out of Stock -
Hop Straining Bag with Drawstring - Medium
A reusable straining bag made from strong nylon mesh.
Ideal for small hop additions or adding oak chips to your brews.
It's also easy to clean and sanitise.
Size: approx 200mm x 375mm
From: Krome DispenseOut of Stock -
Filter - 0.5 Micron Carbon cartridge for Water Filter
0.5 Micron Carbon Water Filter to fit our 10 inch housing.
Perfect for removing chlorine in water.
Features:
- 0.5 micron nominal filtration
- Cyst reduction (Giardia, Cryptosporidium)
- Turbidity reduction
- Chlorine taste and odor reduction
Temperature Rating: approx. 4 °C to 52 °C
Model: Matrikx CR1
From: KX Technologies, USAOut of Stock -
26cm Funnel (mesh sold separately)
A general all-purpose plastic funnel with a top diameter of 26cm. The external diameter of the bottom of the funnel is 26mm
Out of Stock -
30cm Plastic Funnel (including mesh filter)
A general all-purpose plastic funnel with a top diameter of 30cm. The external diameter of the bottom of the funnel is 28mm
Out of Stock -
Mesh screen insert for 26cm and 30cm Funnels
A mesh insert that is designed to fit inside the 26cm and 30cm plastic funnels, which allows you to filter out solids from the liquid you are passing through the funnel.
The mesh is a fine metal screen with a diameter of 95mm. Product includes a small tab which helps you remove the mesh from the funnel, if you insert it in the right way up to begin with.
-
Grainfather Pump - UK/EU/NZ/AU/SA
Pressure: Low pressure Name: magnet water pump Pump Design: magnetive drive circulation pump Max Flow: 11/12LPM Voltage: 220V AC-230V AC Self Priming: 3 Meters Duty Cycle: Intermittent Flow Rate:: 11/12L/min Max Head: 1.5/2.1MOut of Stock -
Premium Plus Micromatic Regulator Dual Outlet
Premium Plus Micromatic, dual guage CO2 Regulator for your kegging system. This high quality regulator will allow constant pressure supply at high output flow rates. Now comes with adjustment knob to alter the pressure, or use the allen key provided. The two stainless outlets come with shut off valves, and allows you to run two or more kegs at the same pressure.
Out of Stock -
Single CO2 Regulator - MK4
The MK4 regulator provides reliable gas control. It has a large body for high flow rates and comes with a precision diaphragm for accurate adjustment, and also has a large adjustment knob for easy adjustment.
Comes with 8mm push in fitting.