Equipment
-
New$5.95PCO1881 Gas Pressure Relief Valve Cap (PRV)
This cap has been designed to be used with the PCO38 Tapping Head for the PET Mini Keg Range.
As it is a standard PET bottle thread (PCO1881). it can also be used on the FermZilla Collection Container / Lid. -
$11.95Floating Dip Tube Filter Kit For FermZilla or Kegmenter - 80cm
FermZilla - SS Ball Float & 80cm Silicone Dip Tube and Filter Kit. Suits Tri-Conical and All Rounder Models.
This simple design allows you to extract the clearest possible liquid in your pressure vessel with the added security of our new filter included. This helps prevent blockages in your carbonation cap poppet. As the liquid level decreases the float goes down at the same time. Perfect for sampling the sediment free!
This 80cm silicone dip tube and stainless steel float with filter suits the FermZilla Tri-Conical fermenter. Also compatible with Kegmenters and Modified Ball Lock Kegs (not minikegs).
From: Kegland
-
$3.95 -
$12.95Cornelius Type Ball Lock Post with 1/2" Male Thread
A ball lock keg post with 1/2? male thread, used on Mytton Rodd kegs but could be used on ball valves or tri-clamp fittings with 1/2" thread. -
$65.00Ball Lock Tapping Head to 2inch Tri-Clover (Commercial Keg Adaptor)
Most commercial kegs will use a traditional type keg spear like d-type keg spear (American Sankey) or the a-type keg spear (German Slider). These keg spears have been designed for commercial use and will use larger and high flow rate commercial keg.
-
$7.95Keg Lid Pressure Relief Valve (grey) - 100 PSI
Replacement pressure relief valve (PRV) for corny kegs, MK4 Regulators, and FermZilla Lids.
This model is the grey - 100 PSI version, also available in 35 and 65 PSI versions.
-
$1.00Poppet O-ring
6mm OD x 3mm ID (metric) 1/4"x1/8" (imperial) o-ring for replacing poppet seals on corny type keg posts.
-
$1.00Pressure Relief Valve O-ring
8mm x 5mm (metric) 3/16" x 5/16" (imperial) - perfect fit for replacing the o-ring on cornelius type lid pressure relief valves -
$7.50Coupler main (bottom) O-ring - No.9
Coupler replacement (bottom) O-ring. Keg couplers are used in many commercial and home environments.
This is a replacement seal for when the original seal gets worn out.Compatible with Micromatic and all 'D and S' type couplers.
Dimensions: 24MM ID x 33.5MM OD
-
$12.95Dip Tube For Corny Kegs - Liquid
Replacement liquid dip tube for 19L corny kegs. If you need one for a 9.5L keg, then simply cut it down to length. Don't cut it too short, because it's much harder to make it longer than it is to make it shorter.
