Equipment
-
250ml Glass Trial Jar
Ideal for measuring up to 250ml in volume. Approximately 30cm tall.Out of Stock -
Thermometer - Thermistor
Thermistor Thermometer from Hanna Instruments. Designed with user functionality and performance in mind, the HI93501 is a waterproof thermistor thermometer that measures temperature from -50.0 to 150.0°C. The included batteries provide up to 4500 hours of continuous use. CAL Check™ and the Battery Error Prevention System (BEPS) ensure the highest level of accuracy and confidence. The probe is replaceable and works with an assortment of specialised probes.
Out of Stock -
Pipette - 2ml
Pipette - 2ml
Perfect for measuring small quantities of liquid product - Like sanitiser, lactic acid or antifoam
-
Micro Scales for brewing - salts - hops (0.1g to 1000g)
The perfect pocket kit for brewday, we wouldn't leave home without one! Either weigh out your salts bare knuckled on the stainelss steel pad, or use a small cup and TARE to zero. Ideal for adjusting your pH with brewing salts, as well as measuring out your hops and granulated whirlfloc.
-
Buffer Powders - 3 kinds per bag
pH Buffer Solution - 3 Pack (4.00 / 6.86 / 9.18)
In order to keep your PH meter as accurate as possible, you will need to calibrate using our three buffer solutions.
We would strongly recommend if you haven't used your ph meter in a while to always use a buffer solution before you start your brew.
If you do not have anyStorage Solution, we would also highly recommend you use this solution for storage after every use.
Directions for use:
1. Completely empty the powder into a clean 250mL glass beaker.
2. Add 250mL of deinoized water to the beaker.
3. Stir until the powder has completely dissolved.
pH solution is accurate to (-+) 0.01pH -
Digital Kitchen Scales up to 10kg (+-3g)
These digital scales are ideal for accurately measuring:
- Hops
- Specialty Malt
- Yeast Starters
- Cleaning Powders
- Disposable Cylinders
- Most items up to 10kg
It is not suitable for weighing under 5g accurately.
-
Fill-O-Meter - Volumetric Water Measuring Device
A must have bit of kit for any homebrewer. Don't waste time next to the hose, punch in what you need and concern yourself with other parts of the brew day. It is the KegLand way!
The perfect present for any homebrewer of any skill level, we all need water to brew. -
Cornelius Type Keg Lid
Brand new replacement lid for corny kegs complete with new seal and pull-ring pressure relief valve.
-
Corny Keg Gas dip tube
A replacement dip tube (gas in) for cornelius-style kegs. Includes o-ring.
Length: approx. 40mm. If you just need the dip-tube o-ring that is available as a separate item.