Equipment
-
$54.95Kegerator Cover - Water Resistant (for Series 4 and X Kegerators)
The Kegarator Cover is an ideal solution for storing your Kegerator outside or exposed to water/dust or dirt. Keep your Kegerator in the best condition you can.
Suitable for all Series 4 and Series X tap configurations.
-
$19.95Hop Tube - Stainless Steel with Chain
This Hop Tube is made from 304 stainless steel and is ideal for addling larger amounts of hop pellets, flowers or spices to your RoboBrew / BrewZilla without blocking the pump. It can also be used in your Brewhouse Kettle/Boiler, 19L corny keg, and the FermZilla. It cannot fit in a standard 50L Keg as the opening is not wide enough. The fine mesh will prevent large particles from blocking the dip tube, pumps or chillers. It will hold approximately 150g of hop pellets, allowing for some space to permit full extraction of the hop oils. Ideal for dry hopping in the keg and can also be used for fruits, wood chips, spices and more. Includes a small ring so it can be hung from the keg lid or side of the vessel.
Diameter: approx. 66mm Heigh: approx. 300 mm.
-
$18.95Drip Tray - Plastic 30cm
A plastic drip tray for your beer taps with removable grill.
Material: Food Grade Polycarbonate
Colour: Black
Dimensions: approx. 30cm x 16cm
From: Krome Dispense -
$20.00Liquid Ball Lock Post with 1/4 Inch Bulkhead Assembly
These ball lock posts include a 1/4 inch BSP thread so you can attach it to a wide range of other fittings.
The posts include a 20mm long thread, an o-ring, poppet, locking nut and short dip tube. This would enable you to make a keg out of any pressure vessel if you wanted to. The assembly can also be fitted to regulators, gas manifolds and various other items.
Both Gas and Liquid posts available.
From: Kegland -
$20.00Liquid Ball Lock Post with 5/8 Thread for keg coupler
Liquid Ball Lock Post with 5/8" Thread. These are a very popular accessory that allows you to convert a commercial keg coupler with 5/8" thread to a standard corny disconnect liquid post. This is the simplest way to allow you to serve beer from commercial kegs in a standard homebrew kegerator or keezer without modifying your beer and gas lines.
-
$20.00Gas Ball Lock Post with 1/4 Inch Bulkhead Assembly
These ball lock posts include a 1/4 inch BSP thread so you can attach it to a wide range of other fittings.
The posts include a 20mm long thread, an o-ring, poppet, locking nut and short dip tube. This would enable you to make a keg out of any pressure vessel if you wanted to. The assembly can also be fitted to regulators, gas manifolds and various other items.
Both Gas and Liquid posts available.
From: Kegland -
$65.00Door mounted Drip Tray 40cm wide – Stainless Steel
Door mounted Drip Tray for your tap system, 40cm wide – Stainless Steel
- Made with high quality stainless steel
- Excellent craftsmanship
- Removable grill makes it easy to cleanOut of Stock -
$15.95Stainless steel Carbonation and Line Cleaning Cap -
The post on this unique carbonation cap has been machined to fit BOTH the black/liquid and grey/gas ball lock disconnects. This carbonation cap also includes a barbtail on the underside so you can attach some beer line to act as a dip tube.
This allows the carbonation cap to be used in several different ways including:
1. Carbonate
2. Cleaning your beer lines
3. Use it to counter pressure bottle fill PET bottles -
$84.95Duotight Bottle Filler Beer Gun
Have a keg of beer, but want to fill some bottles to take with you to the game, beach, or friend's house? This beer gun is a great way to fill bottles from a keg. Every part that comes into contact with your beer is stainless steel. This unit features a CO2 purge, which helps to prevent oxidation during filling.
Now with duotight fittings as standard making the set up and pack away process extremely simple and secure. -
$2.20
