Equipment
-
Black Plastic Draft Tap Handle - Long slender
A standard plastic handle for beer taps, with threaded insert to fit most faucets. Our most popular selling faucet handle.
One of many kegging accessories that we stock.
From: Krome Dispensemeasurements:
22.5mm W (top) to 17.5mm W (bottom)
67mm Long
Thread size 8.5mm -
Nukatap Growler Filler Spout
The Growler Filler Spout extension can be used on any of the Nukatap beer taps. The spout has a 13mm barb which you can attach some hose so you can fill your growler from the bottom up to minimise foaming.
Simply un-screw the regular nozzle and screw on the Growler Filler Spout with hose attached and use as you would a growler filler tap. Also compatible with Intertap models.
We recommend using silicone hose, available separately. -
English Barrel Tap. Tapered Thread
Complete with swivel head and a tapered thread that is compatible with "English" style fermentation barrels. Available in white only.
This is not compatible with the standard 30L plastic fermentation buckets available in NZ. -
Tap. Italian Barrel & Locknut (med.spigot)
Tap. Italian Barrel & Locknut (med.spigot). As this tap has a backing locknut and two rubber washers, it is suitable for those looking to mount a tap in any plastic vessel once you have drilled a suitable size hole. -
Silicone Stopper for Brew Bucket and FTSs Lid
Silicone Stopper for Ss Brew Buckets and Chronicals, made from food grade silicone. -
Plastic Picnic Tap (barbed)
A black plastic picnic tap - the quick, economic and easy solution to serve beer from a keg. Commonly used as part of minikeg setups which are great for taking on the road, but also a good option for someone who is looking for the cheapest method of setting up a home kegerator or keezer.
Compatible with most beer line sizes, although we recommend using commercial grade 4mm Ledavin to reduce the required length of beer line to balance your serving system. -
Carbonation Stone - Tri-Clamp
A carbonation stone designed with a removable and replaceable carb stone. Ideally suited to Ss Brewtech unitanks up to 1bbl.
- 1.5" Tri-Clamp
- 3/8" Hose barb valve
- 0.5 Micron stainless steel carb stone
Note: it needs a minimum 19mm inner diameter tee to be used in an oxygenation kit.
-
Ss Brew Bucket Ball Valve and Racking Arm
A replacement ball valve and racking arm for Ss Brew Tech Brew Buckets.
Features:
- 3/8" Mini Ball Valve
- 304 Stainless Steel
- racking arm
- all O-rings included -
HS White 30L Fermenter Bucket Lid with Hole
Food grade plastic lid with pre-drilled grommet hole for Handcraft Supplies 30L Fermenter. Also fits the Kegland 30L Fermenter Bucket. -
Nukatap - Seal Kit
This pretty handy kit contails all the seals needed for both the standard Nukatap and the Flow Control Nukatap.
The majority of these seals would never normally need to be replaced, but in the event of accidental loss / extreme commercial use please replace washers with the addition of food-grade lubricant to ensure their longevity.
If you have not changed your seals before, it's a great idea to take a note of which seal goes where as you remove the old ones!