Kegging
-
$10.00Beer Tower Cap
Replacement tower cap for standard 3” beer towers. The cap covers the top of the tower by fitting around the outside. -
$10.00Beer Tower Base Cover
A polished chrome screw cover for a 3" draft beer tower base.
Material: Stainless Steel 304
Finish: Polished
From: Krome Dispense
External diameter of 115mm and an internal diameter of 75mm. -
$28.00Stainless Beer Tap Shank 5mm (3/16") barb x 44mm Column
A stainless steel column shank 44mm long for your beer tap, with a 5mm barbed outlet and Tig welded elbow. Length: approx. 44mm (1.75") Bore size: approx. 5mm (3/16") Material: Stainless steel From: Krome Dispense -
$5.00Beer Tap Handle - European - Plastic
A European-style black plastic handle for beer taps. Fits most faucets.
There are many shapes of tap handles. This is a simple but durable version.
From: Krome Dispense -
$39.95Beer Tap - Standard - Stainless
A quality, standard beer faucet made from 100% stainless steel.
Requires a shank and handle, sold separately. -
$34.95Beer Tap - Standard - Chrome Plated C-201
Chrome plated brass standard dispensing faucet with brass lever.
Requires a shank and handle, sold separately. -
$8.00Locking Wall Flange for Shank Assembly
The Locking Wall Flange allows you to hold the shank securely in place by fitting three screws that mount the flange to the inside of the door or wall. -
$0.50Silicone Washer Seal - 5/8 for Keg Coupler and Tap Shank
A 5/8" silicone washer seal for Keg Coupler or Tap Shank.
Note: may come in black or white/clear.
Silicone washer seals are easier to get a proper seal but are also easier to damage. If you are looking for a more robust solution consider using a 5/8" neoprene washer instead.Out of Stock -
$5.00Stainless Steel Flange For Shank
Stainless steel flange for standard beer shanks, as an alternative to the standard black plastic option.Out of Stock -
$9.95Stainless MFL Tap Shank Adaptor
The MFL Tap Shank Adaptor is what you need to connect your draft tap directly to your MFL disconnect. These allow you to make a very compact portable setup.
We recommend using one of the Flow Control Nukatap with this adaptor as this provides some restriction of the flow but they will also work with Intertap, Nukatap and other brands of taps. A nylon washer is also recommended between the disconnect and the shank adaptor.
Please bear in mind that due to the compact size there is not enough space to accommodate an auto spring return so it is not compatible that setup.
