Taps, Towers and Accessories
-
$2.49 -
$6.95Plastic Picnic Tap (barbed)
A black plastic picnic tap - the quick, economic and easy solution to serve beer from a keg. Commonly used as part of minikeg setups which are great for taking on the road, but also a good option for someone who is looking for the cheapest method of setting up a home kegerator or keezer.
Compatible with most beer line sizes, although we recommend using commercial grade 4mm Ledavin to reduce the required length of beer line to balance your serving system. -
$8.90Nukatap Growler Filler Spout
The Growler Filler Spout extension can be used on any of the Nukatap beer taps. The spout has a 13mm barb which you can attach some hose so you can fill your growler from the bottom up to minimise foaming.
Simply un-screw the regular nozzle and screw on the Growler Filler Spout with hose attached and use as you would a growler filler tap. Also compatible with Intertap models.
We recommend using silicone hose, available separately. -
$4.10Black Plastic Draft Tap Handle - Long slender
A standard plastic handle for beer taps, with threaded insert to fit most faucets. Our most popular selling faucet handle.
One of many kegging accessories that we stock.
From: Krome Dispensemeasurements:
22.5mm W (top) to 17.5mm W (bottom)
67mm Long -
$4.005/8 Inch Hex Nut for Keg Coupler or Tap Shank
Chrome plated brass Hex Nut, often used for attaching a tail piece to a shank.
You may also need a tail piece and neoprene washer, available separately.
From: Krome Dispense -
$7.001/4" Shank Tail Piece - Elbow
Stainless steel elbow Tail Piece for your beer shank.
From: Krome Dispense
Material: 304 grade stainless steel
You may also need a hex nut or wing nut, and neoprene washer. -
$5.003/16" Shank Tail Piece - Straight
Stainless steel Tail Piece for your beer shank.
From: Krome Dispense
Material: 304 grade stainless steel
You may also need a hex nut or wing nut, and neoprene washer - available separately. -
$3.40Nukatap (standard) return spring - 62mm
Nukatap Auto-close spring for use with the normal Nukatap. Also compatible with Intertap model, but not compatible with the flow control version of either. -
$25.00NUKATAP duotight (Black) Short Shank - (duotight compatible)
These black stainless steel duotight compatible short shanks are the perfect addition to your black phantom font tower. Couple this with the Black NUKATAP SS Stealth bomber for the ultimate sleek and stealthy draught setup for your kegerator or home bar.
Item Includes:
- Blank Stainless Steel Shank with a 6.5mm duotight compatible barb.
- Ring collar
- Nut
- Right angle font collar to suit font
- Shaped internal collar to suit fontOut of Stock -
$36.50K-Lok Female x 3/4 Male (Tap Shank)
The K-Lok adaptors/quick disconnects are compatible with Andale (Snaplok), Lancer Pacific (Fatlock) and other brands of draft beer quick lock fittings that are often seen in commercial pubs and bars.
These are the font adaptors that are designed to fit any fonts with ¾ threaded font such as our Flooded Fonts.
These K-Lok couplers are designed to be a dry break so when you disconnect the male side the flow is cut off.
