This picnic tap assembly kit comes with everything you need to pour the perfect pint from your keg.

Includes a “flow control keg connector” so no more foaming issues. Just turn the dial on the top of the connector for a faster or slower flow. This also eliminates the need for a long hose/tube.

DIY Tap Handle Inserts - Dual Threaded - 3/8″-16 threads, .625″ Length.

Want to make your own unique tap handles but the thread type is strange? These simplistic brass inserts are the answer.

All you'll need is a 12.7mm (1/2") hole drilled into your handle (Pine, Red Gum, Oak, Cherry, Maple, etc), then screw in with a large flat screw driver.

It is important not to push down too hard if you're going to using a screw driver, or wide drill bit. It will strip the thread. Let the piece cut into the wood. Ensure that it is straight.

Suits NukaTap and Intertap taps

The Nukatap FC (Flow Control) model is latest technology in flow control tap design giving you all the advantages of a forward sealing tap however still allowing you to control the flow speed using a simple flow control leaver on the right hand side of the tap. This makes balancing your beer lines a snap. This type of tap is typically suited to customers who are often switching from one beer style to the next and want maximum flexibility in their draft system. The Nukatap FC is also the first forward sealing tap ever manufactured that can be used with a spring return.  Historically on older tap designs such as the Intertap the FC it was not possible to make the self closing spring design work.  The new patented Nukatap FC design also includes this highly desirable feature.

KegLand is proud to introduce the much awaited duotight compatible Short Shank in Stainless Steel. Now the dreaded heating of hoses and stretching them over a barb and clamping them without a proper stepless clamp tool is a thing of the past. A complete push in Kegerator set up could be yours, or a custom jockey box font set up. Or upgrade the barbed short shanks you have now with our EVABarrier Double Walled hose with duotight by your side.

A stainless steel shank for your beer tap, with a bore size of 4.76mm (3/16").

Available in three sizes with shank lengths of: approx. 79mm, 105mm, and 130mm

Note there is no tail piece included.

A shank made from surgical grade stainless steel which is highly resistant to corrosion. This makes it ideal for wine and kombucha as well as beer. It has a bore size of 6.35mm (1/4").

Available in two sizes with shank lengths of: approx. 79mm, and 130mm

Note there is no tail piece included.

This handy tap handle looks great and works with all standard taps. Print the graphics with your desktop printer and you can see your own beer label in the decal holder.

Each new tap handle also comes with a removable, erasable chalkboard surface and if you flip it over you have a whiteboard surface.

The MFL Tap Shank Adaptor is what you need to connect your draft tap directly to your MFL disconnect. These allow you to make a very compact portable setup.

We recommend using one of the Flow Control Nukatap with this adaptor as this provides some restriction of the flow but they will also work with Intertap, Nukatap and other brands of taps. A nylon washer is also recommended between the disconnect and the shank adaptor.

Please bear in mind that due to the compact size there is not enough space to accommodate an auto spring return so it is not compatible that setup.

A square design beer tap tower which fit all kinds of interiors in modern bars or at home. Available in triple and four tap models.

- Made of high quality stainless steel for durability and reliability
- 100% stainless steel contact with beer
- SS polished finish unless specified