A stainless steel handle for FermZilla units. These handles are made from 304 stainless steel and suit the large family of FermZilla fermenters/uni tanks/bright tanks.

The handles are made from 5.5mm thick 304 grade stainless steel and held together with stainless bolts.

These handles are suitable to take load up to 100kg.

Includes:

1 x Airlock
1 x 4 inch Flat Plate with hole
1 x Bung (Bored)
1 x Beaded Silcone Seal
1 x 4 inch Tri-Clover Clamp

If this product is out of stock stock, we can order them in for our customers. If you wish to find out more about this product, please contact us.

The Ss Chronical Stainless Fermenter - available in 26 litre, 52 litre and 64 litre.

The Ss Chronical Litre Fermenter - a high quality yet affordable conical stainless steel fermenter.

- Available in various sizes
- Certified food grade 304 Stainless Steel
- High quality fittings/valves
- 1 1/2" Tri-Clamp Fittings (lid, side, bottom)
- Rotatable racking arm
- Pressurisable for keg transfers
- Sanitary welds
- Brewer's grade silicone gaskets
- Weldless thermowell
- Electrically etched (not painted) gallon markings
- 3/8" threaded inserts on legs if casters are required
- Pressure relief valve included

The manufacturer recommends using Trisodium Phosphate (TSP) (sold separately) for initial cleaning to remove oils, grease and any manufacturing residue.

From: Ss Brewing Technologies, USA

This black HDPE lid has been designed to be chemically resistant but also strong enough to hold up to 2.5bar pressure.

This lid can screw onto the top of your Fermzilla Collection Container and this allows you to use the Fermzilla collection contianer for other stainless fermenters with a 2 inch tri-clamp dump valve.

Note: clamp and container not included.

Yay, finally a wider mouth demijohn that will take our easy siphons!

Please note these demijohns come with a screw top lid rather than a swing top. The swing tops are not compatible with this demijohn.

Neck internal diameter 40mm

A superbly finished tank in 304 stainless steel with high quality polished internal finish.

Offered with the full VC kit – airlock, pump, tube and floating lid.

Fitted with a welded ¾” BSP socket and are supplied with a stainless steel drain tap. 

A replacement set of o-rings for standard and Brewmaster Chronical fermenter racking arms. These o-rings also work on Ss Brewtech kettle pickup tubes.

Includes: 10mm x 1.2mm o-ring - set of four. 

From: Ss Brewing Technologies, USA

23l glass carboy

*Note if this is out of stock, it is due to supply chain problems. This may be out of stock for the unseen future.
Please get in touch for any questions.