These 50L stainless steel vessels are designed just like a commercial beer keg but with a large 10cm (4inch) tri-clover opening at the top so you can easily get inside the keg to clean it out.
Can also be used as a distillation boiler.

This Kegmenter is bundled with a stainless 4inch tri-clamp ball lock lid which will enable you to turn your kegmenter into a unitank fermenter, and pressurisable so it can also be used as a keg.

Standard 30L fermenter bucket with lid.

Kit contains:

• Litre markings (etched on outside)
• Bored lid - for the airlock.
• Thermometer strip
• Airlock
• Tap
• Grommet

If this product is out of stock stock, we can order them in for our customers. If you wish to find out more about this product, please contact us.

The Ss Chronical Brewmaster Edition Stainless Fermenter - available in 26 litre, 52 litre and 64 litre.

If a glycol chiller is a bit out of reach at the moment, but you want to use the Temp Twister in your Kegmenter or FermZilla, this little product can help you on your way to cool your fermenter. Simply submerge the pump in a large bucket with water and ice.

A stainless steel handle for FermZilla units. These handles are made from 304 stainless steel and suit the large family of FermZilla fermenters/uni tanks/bright tanks.

The handles are made from 5.5mm thick 304 grade stainless steel and held together with stainless bolts.

These handles are suitable to take load up to 100kg.

Includes:

1 x Airlock
1 x 4 inch Flat Plate with hole
1 x Bung (Bored)
1 x Beaded Silcone Seal
1 x 4 inch Tri-Clover Clamp

If this product is out of stock stock, we can order them in for our customers. If you wish to find out more about this product, please contact us.

The Ss Chronical Stainless Fermenter - available in 26 litre, 52 litre and 64 litre.

The Ss Chronical Litre Fermenter - a high quality yet affordable conical stainless steel fermenter.

- Available in various sizes
- Certified food grade 304 Stainless Steel
- High quality fittings/valves
- 1 1/2" Tri-Clamp Fittings (lid, side, bottom)
- Rotatable racking arm
- Pressurisable for keg transfers
- Sanitary welds
- Brewer's grade silicone gaskets
- Weldless thermowell
- Electrically etched (not painted) gallon markings
- 3/8" threaded inserts on legs if casters are required
- Pressure relief valve included

The manufacturer recommends using Trisodium Phosphate (TSP) (sold separately) for initial cleaning to remove oils, grease and any manufacturing residue.

From: Ss Brewing Technologies, USA

This black HDPE lid has been designed to be chemically resistant but also strong enough to hold up to 2.5bar pressure.

This lid can screw onto the top of your Fermzilla Collection Container and this allows you to use the Fermzilla collection contianer for other stainless fermenters with a 2 inch tri-clamp dump valve.

Note: clamp and container not included.