Equipment
-
$2.20 -
$4.95Faucet And Shank Cleaning Brush
Double sided Faucet and shank cleaning brush for maintaining your beer taps and dispensing system. -
$5.504mm ID Ledavin PVC tube / hose
This is a bulk product - one unit equals 1 meter.
Clear 4mm ID Ledavin PVC tubing perfect for gas or beer line. Capable of fitting a standard disconnect barb, not suitable for push in fittings (without a barb to tube adapter).
This is in our opinion the best beer line for home use, where you want the line as short as possible (kegerators, fridge mounted taps etc). It's got great line resistance, has a small diameter and therefore you need a much shorter hose to supply the needed line resistance. -
$1.45Worm clamp
Stainless steel adjustable Worm Clamp. These are great for gas or beer lines, or tubing on wort chillers.
Sizes:
- 3/16" (to 5/16")From: Krome Dispense
-
From: $149.90
To: $154.85
Growler Dispensing Kit (cartridges optional)
This mini drafto growler is a portable keg system. You will never lose carbonation with this set up.
The Ultimate Growler is double walled and keeps your beverage cold for hours.
Fill up the Ultimate growler with your favourite beer or cider or even carbonated punch! Great for a party, BBQ or day at the beach!
-
$59.95Drip Tray - Door Mounted 30cm
Stainless steel door mounted drip tray.
Dimensions: approx. 30cm x 15cm
-
$69.95Nukatap Counter Pressure Bottle Filler
The Nukatap Counter Pressure Bottle Filler is a great way to fill bottles directly from your taps without compromising your kegged beer’s flavour, aroma or carbonation levels.
It's very compact and will fit any tap with 10.0 mm inner diameter spout/nozzle or with a 3/8" general thread. To use this device, simply connect your CO2 gas line to the filling unit and away you go.
Out of Stock -
$6.00Hot Fill Wine & Wort Bladder/Cask 23L
Stop wasting time chilling home brew wort. These bladders/bags are ideally suited to brewers who want to save time and avoid chilling wort on your brew day. Simply fill with hot wort and screw on the cap.
Out of Stock -
$8.007 in 1 Faucet Spanner/Wrench
EVERYONE SHOULD HAVE ONE!
This handy and inexpensive tool is what every home brew kegger should have in the toolbox. It's really useful for all the most common fittings that you are likely to see in the draft beer world.
This new 7 in 1 tool is also suitable for duotight fittings so it's been improved since the older 5 in 1 tools.
Out of Stock -
$14.95Faucet Cleaning Jumper Hose
A beer tap cleaning hose that allows you to join one shank front to another. Great for chaining shanks together for cleaning.
