Stainless steel elbow Tail Piece for your beer shank.

From: Krome Dispense
Material: 304 grade stainless steel

You may also need a hex nut or wing nut, and neoprene washer.

This jacket is designed to insulate your FermZilla 27L fermenter during the colder months to keep your fermentation at the optimum temperature.

It can also be used with a heater belt to warm up the wort if the heat from the fermentation isn't enough.

Completely blocks any light/UV to prevent light-stuck beer.

From: Kegland

For use with the Sterilock Airlock Contains 4 odour absorbing capsules to remove fermentation odours. 

The Sterilock contains a patented nanoseal that removes fermentation odours and allows C02 gases to safely vent while preventing any contaminants (including bacteria) to enter the fermentation vessel.

The MFL Tap Shank Adaptor is what you need to connect your draft tap directly to your MFL disconnect. These allow you to make a very compact portable setup.

We recommend using one of the Flow Control Nukatap with this adaptor as this provides some restriction of the flow but they will also work with Intertap, Nukatap and other brands of taps. A nylon washer is also recommended between the disconnect and the shank adaptor.

Please bear in mind that due to the compact size there is not enough space to accommodate an auto spring return so it is not compatible that setup.

For maintaining ideal fermentation temperatures by providing a gentle heat around the outside of your fermenter.

The STC-1000 is a temperature controller you can use to control your fermentation temperature. It has a hot and a cool circuit which you can use to heat and ferment your wort depending on the setting of your controller. This is a bare bones controller, and you need to assemble the controller yourself.

The easiest way to do this is to buy two cheap extension leads which you can use for all wiring and plugs/sockets, and then assemble into any suitable housing such as a Systema box.

There are lots of easy to follow wiring videos available on Youtube.

Comes with a 1 meter long temperature probe.

Model -240V

Control your fermentation temperature accurately, every time!