Silicone Stopper for Ss Brew Buckets and Chronicals, made from food grade silicone.

A black plastic picnic tap - the quick, economic and easy solution to serve beer from a keg. Commonly used as part of minikeg setups which are great for taking on the road, but also a good option for someone who is looking for the cheapest method of setting up a home kegerator or keezer.

Compatible with most beer line sizes, although we recommend using commercial grade 4mm Ledavin to reduce the required length of beer line to balance your serving system.

A replacement ball valve and racking arm for Ss Brew Tech Brew Buckets.

Features:
- 3/8" Mini Ball Valve
- 304 Stainless Steel
- racking arm
- all O-rings included

Food grade plastic lid with pre-drilled grommet hole for Handcraft Supplies 30L Fermenter. Also fits the Kegland 30L Fermenter Bucket.

This pretty handy kit contails all the seals needed for both the standard Nukatap and the Flow Control Nukatap.

The majority of these seals would never normally need to be replaced, but in the event of accidental loss / extreme commercial use please replace washers with the addition of food-grade lubricant to ensure their longevity.

If you have not changed your seals before, it's a great idea to take a note of which seal goes where as you remove the old ones!

Stainless Steel forward sealing Ultrataps to fit the latest Mangrove Jack's Kegerators, are now available individually. Note they can also be used on other homemade/custom kegerators or the like – as they are universal.
Comes with handle.

Note does not include shank.

The K-Lok adaptors/quick disconnects are compatible with Andale (Snaplok), Lancer Pacific (Fatlock), Bracton (B-Lock) and other brands of draft beer quick lock fittings that are often seen in commercial pubs and bars.

These fittings include the collet and they attach directly to the back of your tap so the tap fits directly into the K-Lok Female x 3/4 Male (Font Adaptor).

The K-Lok adaptors/quick disconnects are compatible with Andale (Snaplok), Lancer Pacific (Fatlock) and other brands of draft beer quick lock fittings that are often seen in commercial pubs and bars.

These are the font adaptors that are designed to fit any fonts with ¾ threaded font such as our Flooded Fonts.

These K-Lok couplers are designed to be a dry break so when you disconnect the male side the flow is cut off.

A carbonation stone designed with a removable and replaceable carb stone. Ideally suited to Ss Brewtech unitanks up to 1bbl.

• 1.5" Tri-Clamp 
• 3/8" Hose barb valve
• 0.5 Micron stainless steel carb stone

Note: it needs a minimum 19mm inner diameter tee to be used in an oxygenation kit.