New red colour!

A bag of 50 caps that can be used on any sized PET bottle. Includes a tamper-resistant seal that lets you know if a bottle has been opened

Mini Core 360 Adaptor for 74g Cartridge/Bulb (G1/2 Male x 5/8-18UNF Female).

This adaptor for the Core 360 Mini Regulator will allow you to use the oversized disposable 74gram co2 bulbs so you can take your keg system anywhere.

Powdered Brewery Wash is an alkaline, non-caustic, environmentally and user friendly cleaner. This is the tablet product. 

PBW is a buffered alkaline detergent that has been proven to be more than an effective substitute for caustic soda cleaners. Because of its unique formulation of buffers and mild alkalis, it is safe on skin as well as soft metals such as stainless steel, aluminum, and on plastics. P.B.W. uses active oxygen to penetrate carbon or protein soils and is not effected by hard water.

No bottling or wasting that little bit left over from standard sized 23L batches and a 19L keg and perfect for smaller experimental batches.

• Portable size
• Pressure carbonate (using the ball lock cap)
• Stainless steel body
• Handles for easy transportation

No bottling or wasting that little bit left over from standard sized 23L batches and a 19L keg and perfect for smaller experimental batches.

This bundle combines the four items needed for a standard ball lock set up, including a Duotight 8mm Flow Control Ball Lock Disconnect for fine flow rate control.

Includes:

• Nukatap Mini
• NukaTap Mini Self Closing Tap Spring
• NukaTap Mini - Duotight Adaptor - 8mm
• Keg Connector - Duotight Flow Control - 8mm Liquid

Most conventional beer taps are designed with a 10mm diameter nozzle/spout so you can pour pint in just over 10sec.  This type of flow rate is great for high turnover bars and commercial venues but this high flow rate requirement is not not necessary or desirable for all applications.  For compact portable systems, or for home brew draft systems, a slower flow rate is easier to control the flow and further reduces foaming issues due to the low liquid volume stored in the tap body. 

Low Profile Ball Lock Tapping Head for Standard Mini Kegs. The ideal solution for a compact kegging setup and for fitting mini kegs in an esky.

This particular tapping head kit comes included with 2.5bar pressure relief valve, liquid and gas ball lock posts and dip tube with filter.

This kit allows you to dispense straight from your mini keg.