This product is not kept in stock in our shop but we can order them in for our customers. If you wish to find out more about this product, please contact us.

The Ss Glycol Chiller 3/8 HP - maintain lager temperatures and enable crash cooling for up to 6 fermenters, even in relatively high ambient temperatures. It is designed to integrate seamlessly with the FTSs kits to provide a complete temperature control system.

This product is not kept in stock in our shop but we can order them in for our customers. If you wish to find out more about this product, please contact us.

The Ss Glycol Chiller 1/5 HP will maintain lager temps and enable crash cooling for up to 3 vessels even in relatively high ambient temperatures. The chiller is designed to integrate seamlessly with FTSs kits to provide a complete temperature control system.

This product is not kept in stock in our shop but we can order them in for our customers. If you wish to find out more about this product, please contact us.

Introducing the Ss Glycol Chiller 3/4 HP, which will maintain lager temps and enable crash cooling for up to 6 vessels even in relatively high ambient temperatures. The chiller is designed to integrate seamlessly with FTSs kits to provide a complete temperature control system.

This temperature connects with the RAPT web portal meaning that you can monitor, log and control the devices plugged into this temperature controller box remotely.

This 30w Heating belt will gently warm without creating major hot spots on your fermenter. 
One reason to go belts over pads for the simplicity of adjusting the height of the belt on your fermenter to increase or decrease the heat transfer. 

Please note these belts are not designed to be used with Fermzilla's or thin plastic fermenters as they can cause warping.

Control and power up to two fermenters at different temperatures and fermentation schedules with the GC2. By accurately controlling the temperature of your fermentation, you can produce consistent beers, every time.

BrewZilla Gen 4 Neoprene Jacket / Parka with Recirculation Arm Cover

New and improved BrewZilla Gen 4 Neoprene Jacket for more stable mash temperatures and heat retention. Now made with 8mm thick neoprene, improved recirculation pipe insulation on both the boiler and the recirculation camlock arm.

If you brew outside where it is cold or windy, the Neoprene Jacket/Parka is a must-buy! Don't lose that heat to the atmosphere!

Available for both 35L and 65L Brewzilla Gen 4 units.

A robust thermometer/timer which allows you to set an alarm for a certain temperature, allows for almost automatic distilling – as long as you are near enough to hear it, you know when it’s done.

Features a 5mm diameter probe that will fit into the thermowell in the Pure Distilling Reflux/Pot Condensers

This low energy RAPT enabled Bluetooth Thermometer is compatible with the Gen 4 BrewZillas and RAPT Temperature Controllers and RAPT Fermentation Chambers. It will not work without one or more of these devices.

By receiving multiple BLE thermometer sensors the BrewZilla can make smarter and more automated decisions on how to control the brewing or distillilation process.  For example a BLE thermometer can be placed into your coolant water so you get an alarm if the temperature is too high, a BLE thermometer can be put into the middle of the malt pipe so you can more accurately control elements switching on/off to achieve a core malt pipe temperature etc.