This rigger filling bypass set up is the perfect tool for any Unitank or Fermzilla and will save your spunding valve from being flooded with beer.
At the same time it allows you to gauge and bottle the left over beer in your fermenter with no extra mucking around or exposure to oxygen!
Unlike the Duotight flow stopper this kit allows you to fill under pressure, keeping carbonation in the beer.

See Dan's video here for an explanation on how to use this kit.

The Nukatap Counter Pressure Bottle Filler is a great way to fill bottles directly from your taps without compromising your kegged beer’s flavour, aroma or carbonation levels.

It's very compact and will fit any tap with 10.0 mm inner diameter spout/nozzle or with a 3/8" general thread. To use this device, simply connect your CO2 gas line to the filling unit and away you go.

This plastic carbonation cap has been designed to suit soda bottles, coke bottles, FermZilla lids and collection containers. These are great for cleaning your keg lines, or carbonating beer quickly in a bottle, or if you simply want to take beer to a mates.

Liquid and Gas ball lock compatible.

This carbonation cap is also suited to any of the FermZilla products such as the FermZilla Pressure kit.

Stainless steel door mounted drip tray.

Dimensions: approx. 30cm x 15cm

This mini drafto growler is a portable keg system. You will never lose carbonation with this set up.

The Ultimate Growler is double walled and keeps your beverage cold for hours.

Fill up the Ultimate growler with your favourite beer or cider or even carbonated punch! Great for a party, BBQ or day at the beach!

Stainless steel adjustable Worm Clamp. These are great for gas or beer lines, or tubing on wort chillers.

Sizes:
- 3/16" (to 5/16")

From: Krome Dispense

Stop wasting time chilling home brew wort. These bladders/bags are ideally suited to brewers who want to save time and avoid chilling wort on your brew day. Simply fill with hot wort and screw on the cap.

EVERYONE SHOULD HAVE ONE!

This handy and inexpensive tool is what every home brew kegger should have in the toolbox.  It's really useful for all the most common fittings that you are likely to see in the draft beer world.

This new 7 in 1 tool is also suitable for duotight fittings so it's been improved since the older 5 in 1 tools.

500ml Sterilser, sediment cleaner for all beer lines and kegs

Approved by all major breweries

Circulate a 5% solution (100ml in 2 L warm water) for 15 minutes. Rinse thoroughly with warm water

ANZFSA C38 Approved

Alkaline Sats 25%

Manufactured in Auckland, NZ