Equipment

Position
  2. 44
  3. 45
  4. 46
  5. 47
  6. 48
10
  1. NukaTap Standard SS Spout (30mm x 10MM ID) NukaTap Standard SS Spout (30mm x 10MM ID)
    $13.95

    NukaTap Standard SS Spout (30mm x 10MM ID)

    Replacement NukaTap SS Spout

    Dimensions:

    30mm x 10mm ID

    Also fits genuine Intertap - SS and Intertap - FC models.

  2. Grainfather Propylene Glycol 3L
    $53.00

    Grainfather Propylene Glycol 3L

    To keep the Grainfather Glycol Chiller operating at its best, we recommend replacing the glycol/water mixture every 6 months. Enough to completely refill the Glycol Chiller and connect up to 4 Conical Fermenters, this food grade propylene glycol will keep the chiller running at its best, providing you with efficient cooling for your fermenters.

  3. Grainfather Conical Pressure Transfer - Upgrade connection KIT Grainfather Conical Pressure Transfer - Upgrade connection KIT
    $25.00

    Grainfather Conical Pressure Transfer - Upgrade connection KIT

    This upgrade kit will complete the Grainfather Conical Fermenter Pressure Transfer.

    Connect your Grainfather Conical Fermenter Pressure Transfer to your CO2 line and corny keg easily with this upgrade kit.

    *Note does not include the Grainfather Conical Fermenter Pressure Transfer in photo.

     

  4. Beer Tower - Single Tap - C173
    $149.95

    Beer Tower - Single Tap - C173

    Single Tap Beer Tower for dispensing your beer from kegs. This is a high quality, Krome Dispense brand beer tower made from stainless steel and comes complete with taps. 

    Includes: 

    • 5 feet beer tubing
    • 1 chrome plated tap
    • 1 black tap handle
    • 1 stainless column (3 inch) mounting hardware and gasket
  5. K-Lok Female x 3/4 Male (Tap Shank) K-Lok Female x 3/4 Male (Tap Shank)
    $36.50

    K-Lok Female x 3/4 Male (Tap Shank)

    The K-Lok adaptors/quick disconnects are compatible with Andale (Snaplok), Lancer Pacific (Fatlock) and other brands of draft beer quick lock fittings that are often seen in commercial pubs and bars.

    These are the font adaptors that are designed to fit any fonts with ¾ threaded font such as our Flooded Fonts.

    These K-Lok couplers are designed to be a dry break so when you disconnect the male side the flow is cut off.

  6. Bishop Tap Handle for Recipe Kits (Blackboard or Whiteboard) Bishop Tap Handle for Recipe Kits (Blackboard or Whiteboard)
    $20.00

    Bishop Tap Handle for Recipe Kits (Blackboard or Whiteboard)

    This handy tap handle looks great and works with all standard taps. Print the graphics with your desktop printer and you can see your own beer label in the decal holder.

    Each new tap handle also comes with a removable, erasable chalkboard surface and if you flip it over you have a whiteboard surface.

  7. Thermowell - Weldless, Multiple Sizes
    $30.00

    Thermowell - Weldless, Multiple Sizes

    A stainless steel thermowell for temperature probes. Designed for Ss Brew Tech products but the universal weldless design can be used with other fermenters.

    - Brewer's Grade 304 Ss
    - Installs into 17mm punched / drilled hole
    - 6.5 mm inner diameter of tube opening

    Available in these sizes:
    - 100mm
    - 200mm
    - 300mm

    Includes one o-ring.

  8. Beer Tap Shank - Stainless with 1/4" Bore
    $34.95

    Beer Tap Shank - Stainless with 1/4" Bore

    A shank made from surgical grade stainless steel which is highly resistant to corrosion. This makes it ideal for wine and kombucha as well as beer. It has a bore size of 6.35mm (1/4").

    Available in two sizes with shank lengths of: approx. 79mm, and 130mm

    Note there is no tail piece included.

  9. Beer Tap Shank (C291) - Stainless with 3/16" Bore - 130mm
    $39.95

    Beer Tap Shank (C291) - Stainless with 3/16" Bore - 130mm

    Beer Tap Shank - Stainless with 3/16" Bore - 130mm
  10. Beer Tap Shank - Stainless with 3/16" Bore
    $24.95

    Beer Tap Shank - Stainless with 3/16" Bore

    A stainless steel shank for your beer tap, with a bore size of 4.76mm (3/16").

    Available in three sizes with shank lengths of: approx. 79mm, 105mm, and 130mm

    Note there is no tail piece included.

Position
  2. 44
  3. 45
  4. 46
  5. 47
  6. 48
10