Food grade Propylene Glycol (99%) from Kegland in a handy 5 litre container.

CIP Spray Ball Tri-Clamp Attachment

- Made from 304 Stainless Steel
- 3" tri-clamp cap with 1/2" MPT
- 2 bar / 29 psi recommended 
- Use on any 3" tri-clamp fitting

This stainless 4inch tri-clover ball lock lid will enable you to turn your kegmenter into a uni tank, pressurisable fermenter or so it can be used as a keg.

This lid comes with a red pressure relief valve (that opens at 2.5bar - compatible thread to Cornelius type PRVs).  The lid has accurately machined gas and liquid posts. 

This lid is ideally suited to also fermenting under pressure so you can use a spunding valve/adjustable pressure relief valve so you can naturally carbonate during primary fermentation.

A repair kit for the Krome stout tap.

Easily repair faucet leaks simply by replacing the gaskets used within. Refer to the secondary image to get a clear understanding of what goes where. It doesn’t need many tools for this job.

Bronco / Picnic Party Taps are an inexpensive way to pour beer and great for portable light weight systems that you can take away with you.

Now even better with the addition of duotights. No more hose clamps or stretching hose over barbs! It also makes it easy to disconnect and balance hosing if required.

Looking for the barbed picnic tap? You'll find it here.

From: Kegland

This is a EPDM 5/8 Washer which is suitable for Keg Couplers and Tap Shanks

Specifications:
15mm ID x 21.5mm OD x 3mm

This is a basic closed transfer kit for transferring from a simple bucket fermenter to a keg.

Get you beverage from your plastic bucket to your keg without exposure to oxygen. Keep your beer fresh!

See our video for how this works. 

The Stout Spout extension can be used on any of the Nukatap beer taps. It has a removable creamer/aerator disc inside that is specially made to serve beers infused with nitrogen gas, and allows the nitrogen gas to flow smoothly through the faucet with the beer to create a smoother, creamier beer. Simply un-screw the regular nozzle and screw on the Stout Spout and use as you would a stout tap.