Equipment
-
$12.001/2" BSP Male Thread x 1/2" Female 90 Degree Elbow Fitting
1/2" BSP Male Thread x 1/2" Female 90 Degree Elbow Fitting. Made from Stainless Steel.
BSP stands for British Standard Pipe Thread and describes the type of threading. -
$6.00Hose barb 1/2" x BSP male 1/2" fitting
Hosebarb 1/2" x BSP male 1/2" fitting
A popular item for people building or modifying their own brewing system. 1/2" BSP is a common thread size and the 1/2" barb is suitable for connecting several sizes of silicone hose. -
$29.95Ball Valve - Three-Piece 1/2"
A 3-piece, full bore stainless steel ball valve complete with locking handle. It has female BSP threads at each end. Being 3-piece it is also easy to disassemble and clean. -
$17.801.5” Tri-Clamp cap with 3/4” BSP female
1.5” Tri-Clamp cap with 3/4” BSP female
Tri-Clamp (also called Tri Clover) fittings consist of 3 parts: the clamp, the end piece and a silicone gasket. Used in most commercial breweries they are very sturdy. With no nooks or crannies for bacteria/yeast to hide, they clean like a breeze.You can see every surface that meets your precious wort. If that weren't reason enough: they don't leak. -
$10.0012.7mm Stainless Steel Compression Fitting 1/2” BSP
A 12.7mm compression fitting with 1/2" BSP thread.
These compression fittings are commonly used with immersion chillers to quickly disconnect the liquid hosing for storage and ease of cleaning. -
$14.951.5” Tri-Clamp cap with 1/2” BSP male
1.5” Tri-Clamp cap with 1/2” BSP male.
Tri-Clamp (also called Tri Clover) fittings consist of 3 parts: the clamp, the end piece and a silicone gasket. Used in most commercial breweries they are very sturdy. With no nooks or crannies for bacteria/yeast to hide, they clean like a breeze.You can see every surface that meets your precious wort. If that weren't reason enough: they don't leak. -
$12.95Dip Tube For Corny Kegs - Liquid
Replacement liquid dip tube for 19L corny kegs. If you need one for a 9.5L keg, then simply cut it down to length. Don't cut it too short, because it's much harder to make it longer than it is to make it shorter.
-
$7.50Coupler main (bottom) O-ring - No.9
Coupler replacement (bottom) O-ring. Keg couplers are used in many commercial and home environments.
This is a replacement seal for when the original seal gets worn out.Compatible with Micromatic and all 'D and S' type couplers.
Dimensions: 24MM ID x 33.5MM OD
-
$1.00Pressure Relief Valve O-ring
8mm x 5mm (metric) 3/16" x 5/16" (imperial) - perfect fit for replacing the o-ring on cornelius type lid pressure relief valves -
$1.00Poppet O-ring
6mm OD x 3mm ID (metric) 1/4"x1/8" (imperial) o-ring for replacing poppet seals on corny type keg posts.
