The Nukatap Counter Pressure Bottle Filler is a great way to fill bottles directly from your taps without compromising your kegged beer’s flavour, aroma or carbonation levels.

It's very compact and will fit any tap with 10.0 mm inner diameter spout/nozzle or with a 3/8" general thread. To use this device, simply connect your CO2 gas line to the filling unit and away you go.

This rigger filling bypass set up is the perfect tool for any Unitank or Fermzilla and will save your spunding valve from being flooded with beer.
At the same time it allows you to gauge and bottle the left over beer in your fermenter with no extra mucking around or exposure to oxygen!
Unlike the Duotight flow stopper this kit allows you to fill under pressure, keeping carbonation in the beer.

See Dan's video here for an explanation on how to use this kit.

A rectangular, counter-top drip tray made of stainless steel with removable cover (no drain).

Includes a cut-out to fit around a beer tower.

Note: design may vary slightly from photo shown.

Dimensions: approx. 30cm x 18cm.

From: Krome Dispense

500ml Sterilser, sediment cleaner for all beer lines and kegs

Approved by all major breweries

Circulate a 5% solution (100ml in 2 L warm water) for 15 minutes. Rinse thoroughly with warm water

ANZFSA C38 Approved

Alkaline Sats 25%

Manufactured in Auckland, NZ

Take the work out of cleaning cornelius kegs, carboys and brewing vessels with the bucket blaster. 

The Bucket Blaster is a great way to get your kegs, fermenters, fermzilla, carboy's or other brewery gear clean while you attend to other tasks.

This Tee Piece helps make a really small and useful keg system out of PET plastic bottles. Great for taking beer to a party or making your own micro/portable/mini keg system.

PET plastic bottles are readily available and inexpensive. The standard thread for PET bottles for carbonated beverates between 0-3L in size is the PCO 1881 thread. 

A great solution for taking 2 L of beer from your keg to wherever you need to go, be it inside or to the party or simply to the other side of the room!

Made from high grade strainless steel, and insulated to keep your beer chilled.

Features:

- Made from 304 grade stainless steel
- Double walled with vacuum insulation
- Flip top lid
- 2 L capacity

The Ultimate Growler is made from 304 Stainless Steel that is completely impervious to oxygen and sunlight (UV) meaning your precious amber liquid is in the absolute best storage container possible.

The Growler also comes with double wall vacuum insulation, helping to keep your beer cold for hours.

Most screw top growlers struggle to hold the pressure required to keep beer fresh and carbonated. The Ultimate Growler comes with a spring wired lid capable of holding up to 40psi.