FermZilla - Conical - Replacement Dual Threaded Cone Piece, Cone Ring Nut, Cone Gasket

This replacement kit is compatible with:

FermZilla 27L - Conical Fermenter

FermZilla 35L - Conical Fermenter

FermZilla 55L - Conical Fermenter

O-Ring included and attached on the Dual Threaded Cone Piece

A Cast Aluminium Cold Plate for beer dispensing. Made from a thick cast aluminium, this plate acts as a large heatsink to absorb heat efficiently from your beer.

Circuit boards for the Kegland Series 4.

• Main circuit board
• Temperature control circuit board
• Keypad membrane sticker

Also compatible with Series X Kegerators.

The STC-1000 is a temperature controller you can use to control your fermentation temperature. It has a hot and a cool circuit which you can use to heat and ferment your wort depending on the setting of your controller. This is a bare bones controller, and you need to assemble the controller yourself.

The easiest way to do this is to buy two cheap extension leads which you can use for all wiring and plugs/sockets, and then assemble into any suitable housing such as a Systema box.

There are lots of easy to follow wiring videos available on Youtube.

Comes with a 1 meter long temperature probe.

Model -240V

For maintaining ideal fermentation temperatures by providing a gentle heat around the outside of your fermenter.

This low energy RAPT enabled Bluetooth Thermometer is compatible with the Gen 4 BrewZillas and RAPT Temperature Controllers and RAPT Fermentation Chambers. It will not work without one or more of these devices.

By receiving multiple BLE thermometer sensors the BrewZilla can make smarter and more automated decisions on how to control the brewing or distillilation process.  For example a BLE thermometer can be placed into your coolant water so you get an alarm if the temperature is too high, a BLE thermometer can be put into the middle of the malt pipe so you can more accurately control elements switching on/off to achieve a core malt pipe temperature etc.

A robust thermometer/timer which allows you to set an alarm for a certain temperature, allows for almost automatic distilling – as long as you are near enough to hear it, you know when it’s done.

Features a 5mm diameter probe that will fit into the thermowell in the Pure Distilling Reflux/Pot Condensers

BrewZilla Gen 4 Neoprene Jacket / Parka with Recirculation Arm Cover

New and improved BrewZilla Gen 4 Neoprene Jacket for more stable mash temperatures and heat retention. Now made with 8mm thick neoprene, improved recirculation pipe insulation on both the boiler and the recirculation camlock arm.

If you brew outside where it is cold or windy, the Neoprene Jacket/Parka is a must-buy! Don't lose that heat to the atmosphere!

Available for both 35L and 65L Brewzilla Gen 4 units.

Control and power up to two fermenters at different temperatures and fermentation schedules with the GC2. By accurately controlling the temperature of your fermentation, you can produce consistent beers, every time.