Equipment
-
$3.20Ledathene Natural Tube hose 4.8mm (3/16") OD x 3mm ID
This is a bulk product - one unit equals 1 meter.
3/16" (4.8MM) X 0.117" (3MM) OD - Ledathene Natural Tube, suitable for gas or beer line in your kegging set-up. This is stiff material and can be used for push in duotight or John guest fittings.Made in New Zealand
-
$2.37Plastic siphon tube / hose 7.9MM ID - per metre
This is a bulk product - one unit equals 1 meter.
This hosing is 7.9mm inside diameter and is great for siphoning beer from one vessel to another. It is available in any length up to 25m. It is made of clear, non-toxic plastic and is suitable for contact with any food-grade liquid.
Not recommended as a beer line that holds beer over long periods of time. We recommend Ledavin as a beer line instead. -
$3.09Racking Cane Holder (for easy siphon)
Racking Cane Holder to help hold your Easy Siphon 580mm and 350mm.
Clips onto the side of plastic fermenters or to the neck of any carboy.
Hose clip diameter 27mm.Turns a job that sometimes needs three hands into one that only needs two.
-
$30.99Easy Siphon 580mm
A 580mm Easi-syphon, perfect for automated siphoning. Long enough to use in a 23L PET carbouys or for siphoning out of a 30L brewing bucket.
Compatible with the 7.9mm siphon hose which is sold separately. -
$25.99Easy Siphon mini - 350mm
A 350mm long Easy syphon perfect for automated siphoning. Long enough to use in a 5L carboys or for siphoning out of a 10L brewing bucket.
Compatible with the 7.9mm siphon hose which is sold separately. We recommend 1.5M in length.Out of Stock -
$99.95Regulator - Secondary CO2 - Precision Plus
The Precision Plus Secondary CO2 Regulator Single Gauge – Pass-Thru is built for durability and high-volume draft beer gas delivery. This inline beer keg CO2 regulator allows easy pressure adjustment from 0 to 60 PSI with a tamper-evident screw and chrome-plated forged brass body for long-lasting use.
The enlarged CO2 port ensures efficient gas flow, while the factory leak-tested safety relief valve protects your system. Ideal for professional draft beer setups that demand precise and reliable CO2 regulation.
-
$6.95Seal Kit for Sodastream Filling Adaptor
Worn down your washers and seals from filling oodles of sodastream bottles? Then you may want to purchase some extra washers and o-rings
Out of Stock -
$79.95Regulator - MK5 CO2 - Tool-Free
Type 30 - MK5 CO2 Regulator - Tool-Free - Dual Gauge (4.5bar PRV & 65psi Gauge)
The MK5 Dual Gauge Regulator by KegLand now comes in a tool-free design with a heap of new features.
-
$49.95CO2 Distributor with MFL - 2, 3, and 4 Outlets
A gas distributor for splitting your CO2 gas line into multiple outlets, with MFL connections. Options for two, three, and four outlets.
Connect just one cylinder to this gas distributor inlet and dispense from many beer kegs – all at the same time. You get the same pressure at all outlet points.
Stainless Steel 304 Wall Mounting Brackets and Screws Included.
Out of Stock -
$24.95Digital Illuminated Mini Gauge 0-90psi for Integrated Blowtie and In-line regulators - KL18388
Traditional analogue gauges require a small capillary mechanism where a small pipe expands and unravels under pressure. This in turn drives a mechanical cog to rotate the gauge needle. This age old technique works quite well especially in large gauges but as this mechanism is manufactured smaller and smaller a tradeoff between accuracy and size becomes the issue. With very small gauges such as a 27mm x 27mm Mini Gauge it's difficult to make them better than 10% accuracy due to the physical constraints of the mechanical components.
Out of Stock
