This high quality beer line will keep your previous beverage in it's best possible conditoin in the process.

When using this 4mm ID size you will get adequate flow resistance with 1.5meters to 2.1meters of beer line between your keg and tap suitable for most kegerator setups.

Pressure Rating (with 1.5safety factor)
30C - 1.4 MPa (200psi)
50C - 0.7MPa (100psi)

This high quality beer line will keep your previous beverage in it's best possible conditoin in the process.

Pressure Rating (with 1.5safety factor)
30C - 1.4 MPa (200psi)
50C - 0.7MPa (100psi)

A 1/4" x 3/8" tube to hose adaptor with a 1/4" hose barb and a 3/8" push-fit connection.

Replacement Tip for 9.5mm (3/8") Racking Cane.

Siphon Hose Clamp - shut off the flow while siphoning when changing vessels

This is a bulk product - one unit equals 1 meter.

3/16" Valpar Natural Tube, suitable for gas or beer line in your kegging set-up. This is stiff material and can be used for push in fittings.

This is a bulk product - one unit equals 1 meter.

This hosing is 6mm inside diameter and is great for siphoning beer from one vessel to another. It is available in any length up to 25m. It is made of clear, non-toxic plastic and is suitable for contact with any food-grade liquid.

Not recommended as a beer line that holds beer over long periods of time. We recommend Ledavin as a beer line instead.

This is a bulk product - one unit equals 1 meter.

1/2" Valpar Natural Tube, suitable for gas or beer line in your kegging set-up. This is stiff material and can be used for push in fittings.

A 5/16" x 1/4" John Guest tube to hose adaptor to connect a 1/4" hose to a 5/16" push-fit connection.