Perfect heating solution for those who want more even coverage and absolute certainty that their PET fermenter will not melt even if the fermenter is empty.

Punching in at an ample 30 watts, this heating wrap belt is great when paired with insulation and a temperature controller box to dial in that optimum fermentation profile.

The Create+ Beeping Alarm Thermometer is a simple to us digital thermometer that allows your customer to set high and a low temperature alarms when using their Create+ T500 Column & Condenser, Alembic Copper Condenser or other compatible distilling equipment. After a temperature is set, the thermometer will beep to notify them that the set temperature has been reached so they can make adjustments to their waterflow or distillation as required.

The STC-1000 is a temperature controller you can use to control your fermentation temperature. It has a hot and a cool circuit which you can use to heat and ferment your wort depending on the setting of your controller. This is a bare bones controller, and you need to assemble the controller yourself.

The easiest way to do this is to buy two cheap extension leads which you can use for all wiring and plugs/sockets, and then assemble into any suitable housing such as a Systema box.

There are lots of easy to follow wiring videos available on Youtube.

Comes with a 1 meter long temperature probe.

Model -110V - 220V AC

For maintaining ideal fermentation temperatures by providing a gentle heat around the outside of your fermenter.

FermZilla - Conical - Replacement Dual Threaded Cone Piece, Cone Ring Nut, Cone Gasket

This replacement kit is compatible with:

FermZilla 27L - Conical Fermenter

FermZilla 35L - Conical Fermenter

FermZilla 55L - Conical Fermenter

O-Ring included and attached on the Dual Threaded Cone Piece

Circuit boards for the Kegland Series 4.

• Main circuit board
• Temperature control circuit board
• Keypad membrane sticker

Also compatible with Series X Kegerators.

The Series X.1 Stainless Kegerator base unit, which includes:

- Kegerator Main Body
- MK4 Regulator
- Wire Shelf
- Black Plastic Wrap Around Drip Tray
- Castor Wheels
- CO2 Cylinder Holder (designed to suit 2.6kg gas cylinder)
- Chrome Plated Guard Rail

FITS 4 KEGS!

Note: this is the base unit only, there are no taps, connectors or font included. See our other kegerator listings if you want the tower and taps.

FermZilla Tri-Conical - 3 Inch x 2 Inch Tri-Clamp Butterfly Valve.

Compatible with the 27L and 55L FermZilla Tri-Conical Series, or any 2 and 3 Inch Tri-Clamp fittings.

A replacement set of o-rings for standard and Brewmaster Chronical fermenter racking arms. These o-rings also work on Ss Brewtech kettle pickup tubes.

Includes: 10mm x 1.2mm o-ring - set of four. 

From: Ss Brewing Technologies, USA