This pretty handy kit contails all the seals needed for both the standard Nukatap and the Flow Control Nukatap.

The majority of these seals would never normally need to be replaced, but in the event of accidental loss / extreme commercial use please replace washers with the addition of food-grade lubricant to ensure their longevity.

If you have not changed your seals before, it's a great idea to take a note of which seal goes where as you remove the old ones!

The Grainfather Fermentation Thermometer is a simple analogue thermometer that can easily be inserted into the Grainfather SF70 Thermowell to measure the temperature of the fermentation

It provides an accurate reading in both Celcius and Fahrenheit. 

A replacement ball valve and racking arm for Ss Brew Tech Brew Buckets.

Features:
- 3/8" Mini Ball Valve
- 304 Stainless Steel
- racking arm
- all O-rings included

Silicone Stopper for Ss Brew Buckets and Chronicals, made from food grade silicone.

Tap. Italian Barrel & Locknut (med.spigot). As this tap has a backing locknut and two rubber washers, it is suitable for those looking to mount a tap in any plastic vessel once you have drilled a suitable size hole.

Complete with swivel head and a tapered thread that is compatible with "English" style fermentation barrels. Available in white only.

This is not compatible with the standard 30L plastic fermentation buckets available in NZ.

The Growler Filler Spout extension can be used on any of the Nukatap beer taps. The spout has a 13mm barb which you can attach some hose so you can fill your growler from the bottom up to minimise foaming.

Simply un-screw the regular nozzle and screw on the Growler Filler Spout with hose attached and use as you would a growler filler tap. Also compatible with Intertap models.

We recommend using silicone hose, available separately.

A standard plastic handle for beer taps, with threaded insert to fit most faucets. Our most popular selling faucet handle.

One of many kegging accessories that we stock.

From: Krome Dispense

measurements:

22.5mm W (top) to 17.5mm W (bottom)
67mm Long
Thread size 8.5mm

Chrome plated brass Hex Nut, often used for attaching a tail piece to a shank.

You may also need a tail piece and neoprene washer, available separately.

From: Krome Dispense