Equipment
-
$9.50Sterilock Odour Capsules (4)
For use with the Sterilock Airlock Contains 4 odour absorbing capsules to remove fermentation odours.
Out of Stock -
$9.50Sterilock Air Lock (with one odour capsule)
The Sterilock contains a patented nanoseal that removes fermentation odours and allows C02 gases to safely vent while preventing any contaminants (including bacteria) to enter the fermentation vessel.
Out of Stock -
$1.00Thermowell and FTSs Chiller Coil - Ss Replacement O-Ring
Ss Replacement O-Ring for SS Brewtech Thermowells and FTSs Chiller Coils.
From: Ss Brewing Technologies, USA
A cheap, small but critical part of your brewkit, don't let a damaged o-ring spoil your brewday. -
$69.955L Propylene Glycol - Kegland
Food grade Propylene Glycol (99%) from Kegland in a handy 5 litre container.
-
$23.99Super Automatica Tirage Bell - 29/31mm (large)
For use on the Red handle "Super Automatica Capper" with Tirage Bells. The standard bell supplied with the Super Automatica Capper is 26mm. This larger 31mm bell is compatible with slightly larger caps and bottle tops.
IMPORTANT: This bell is NOT compatible with the "Green Standard Bench Capper" OR "Lever Bench Capper" - due to different thread size.
-
$4.00Wing Nut for Beer Shank
Chrome plated brass wing nut, often used for attaching a tail piece to a shank. A handy alternative to the standard 5/8" hex nut if you have an application where you wish to be able to disassemble the shank tail piece without using a wrench. -
$0.50Silicone Washer Seal - 5/8 for Keg Coupler and Tap Shank
A 5/8" silicone washer seal for Keg Coupler or Tap Shank.
Note: may come in black or white/clear.
Silicone washer seals are easier to get a proper seal but are also easier to damage. If you are looking for a more robust solution consider using a 5/8" neoprene washer instead.Out of Stock -
$8.00Locking Wall Flange for Shank Assembly
The Locking Wall Flange allows you to hold the shank securely in place by fitting three screws that mount the flange to the inside of the door or wall.Out of Stock -
$5.00Faucet Coupling Nut
Chrome plated brass faucet coupling nut to attach a beer tap to a shank. Works with most standard beer fittings.
With this faucet replacement nut you can renew a worn-out part on your well-used draft faucet.Out of Stock -
$50.00Beer Tower Extension - Single to Double (C-516)
The Beer Tower Extension allows you to easily convert an existing single faucet tower into a two faucet tower. Recommended for use on 3" diameter metal beer towers, it includes a shank assembly, a drill bit and 3 screws for installation.
