Eliminates ALL smells completely from the fermentation process for both beer and spirits.

Includes everything you need to attach to a standard fermenter with airlock.

Tired of sucking air when transferring from your Fermzilla or Kegmenter? Or pulling air instead of the sweet nectar in your keg with a floating diptube. This is the solution!

Upgrade your setup with this fantastic Gen2 weighted filter! Constructed from durable HDPE and premium 304-grade stainless steel, it's built to withstand boiling and is compatible with most cleaners.

If you're looking for the perfect addition to your Kegerator or Keezer set up, look no further than the simple T-Bar from KegLand. Mount 4 NukaTap - SS taps to this with enough room for Bishop Tap Handles.

This pretty handy kit contains all the seals needed for the NukaTap FC Gen2.

This duotight 8mm (5/16") adaptor is designed to suit the Nukatap Mini and will allow you to couple your Nukatap mini to a wide range of other 8mm(5/16") duotight fittings or be able to attach to the Duotight Flow Control Ball Lock Disconnect.

This stainless 4inch tri-clover ball lock lid will enable you to turn your kegmenter into a uni tank, pressurisable fermenter or so it can be used as a keg.

This lid comes with a red pressure relief valve (that opens at 2.5bar - compatible thread to Cornelius type PRVs).  The lid has accurately machined gas and liquid posts. 

This lid is ideally suited to also fermenting under pressure so you can use a spunding valve/adjustable pressure relief valve so you can naturally carbonate during primary fermentation.

This picnic tap assembly kit comes with everything you need to pour the perfect pint from your keg.

Includes a “flow control keg connector” so no more foaming issues. Just turn the dial on the top of the connector for a faster or slower flow. This also eliminates the need for a long hose/tube.

This collection container fits all the FermZilla Tri-Conical fermenters that have a 3 inch x 3 inch butterfly valve. No more threads or removal tools to get this off, simply depressurise and remove the tri-clamp fitting. We'd recommend placing a towel or upside down frisby to catch some drips.